Driver implementing the fuse API for Freescale's On-Chip OTP Controller (OCOTP)
|
on MXC
|
|
This IP can be found on the following SoCs:
|
- Vybrid VF610,
|
- i.MX6.
|
|
Note that this IP is different from albeit similar to the IPs of the same name
|
that can be found on the following SoCs:
|
- i.MX23,
|
- i.MX28,
|
- i.MX50.
|
|
The section numbers in this file refer to the i.MX6 Reference Manual.
|
|
A fuse word contains 32 fuse bit slots, as explained in 46.2.1.
|
|
A bank contains 8 fuse word slots, as explained in 46.2.1 and shown by the
|
memory map in 46.4.
|
|
Some fuse bit or word slots may not have the corresponding fuses actually
|
implemented in the fusebox.
|
|
See the README files of the SoCs using this driver in order to know the
|
conventions used by U-Boot to store some specific data in the fuses, e.g. MAC
|
addresses.
|
|
Fuse operations:
|
|
Read
|
Read operations are implemented as read accesses to the shadow registers,
|
using "Bankx Wordy" from the memory map in 46.4. This is explained in
|
detail by the first two paragraphs in 46.2.1.2.
|
|
Sense
|
Sense operations are implemented as the direct fusebox read explained by
|
the steps in 46.2.1.2.
|
|
Program
|
Program operations are implemented as explained by the steps in 46.2.1.3.
|
Following this operation, the shadow registers are not reloaded by the
|
hardware.
|
|
Override
|
Override operations are implemented as write accesses to the shadow
|
registers, as explained by the first paragraph in 46.2.1.3.
|
|
Configuration:
|
|
CONFIG_MXC_OCOTP
|
Define this to enable the mxc_ocotp driver.
|
