// SPDX-License-Identifier: GPL-2.0-only
|
/*
|
* Maxim Integrated DS1803 digital potentiometer driver
|
* Copyright (c) 2016 Slawomir Stepien
|
*
|
* Datasheet: https://datasheets.maximintegrated.com/en/ds/DS1803.pdf
|
*
|
* DEVID #Wipers #Positions Resistor Opts (kOhm) i2c address
|
* ds1803 2 256 10, 50, 100 0101xxx
|
*/
|
|
#include <linux/err.h>
|
#include <linux/export.h>
|
#include <linux/i2c.h>
|
#include <linux/iio/iio.h>
|
#include <linux/module.h>
|
#include <linux/mod_devicetable.h>
|
|
#define DS1803_MAX_POS 255
|
#define DS1803_WRITE(chan) (0xa8 | ((chan) + 1))
|
|
enum ds1803_type {
|
DS1803_010,
|
DS1803_050,
|
DS1803_100,
|
};
|
|
struct ds1803_cfg {
|
int kohms;
|
};
|
|
static const struct ds1803_cfg ds1803_cfg[] = {
|
[DS1803_010] = { .kohms = 10, },
|
[DS1803_050] = { .kohms = 50, },
|
[DS1803_100] = { .kohms = 100, },
|
};
|
|
struct ds1803_data {
|
struct i2c_client *client;
|
const struct ds1803_cfg *cfg;
|
};
|
|
#define DS1803_CHANNEL(ch) { \
|
.type = IIO_RESISTANCE, \
|
.indexed = 1, \
|
.output = 1, \
|
.channel = (ch), \
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
}
|
|
static const struct iio_chan_spec ds1803_channels[] = {
|
DS1803_CHANNEL(0),
|
DS1803_CHANNEL(1),
|
};
|
|
static int ds1803_read_raw(struct iio_dev *indio_dev,
|
struct iio_chan_spec const *chan,
|
int *val, int *val2, long mask)
|
{
|
struct ds1803_data *data = iio_priv(indio_dev);
|
int pot = chan->channel;
|
int ret;
|
u8 result[ARRAY_SIZE(ds1803_channels)];
|
|
switch (mask) {
|
case IIO_CHAN_INFO_RAW:
|
ret = i2c_master_recv(data->client, result,
|
indio_dev->num_channels);
|
if (ret < 0)
|
return ret;
|
|
*val = result[pot];
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
*val = 1000 * data->cfg->kohms;
|
*val2 = DS1803_MAX_POS;
|
return IIO_VAL_FRACTIONAL;
|
}
|
|
return -EINVAL;
|
}
|
|
static int ds1803_write_raw(struct iio_dev *indio_dev,
|
struct iio_chan_spec const *chan,
|
int val, int val2, long mask)
|
{
|
struct ds1803_data *data = iio_priv(indio_dev);
|
int pot = chan->channel;
|
|
if (val2 != 0)
|
return -EINVAL;
|
|
switch (mask) {
|
case IIO_CHAN_INFO_RAW:
|
if (val > DS1803_MAX_POS || val < 0)
|
return -EINVAL;
|
break;
|
default:
|
return -EINVAL;
|
}
|
|
return i2c_smbus_write_byte_data(data->client, DS1803_WRITE(pot), val);
|
}
|
|
static const struct iio_info ds1803_info = {
|
.read_raw = ds1803_read_raw,
|
.write_raw = ds1803_write_raw,
|
};
|
|
static int ds1803_probe(struct i2c_client *client,
|
const struct i2c_device_id *id)
|
{
|
struct device *dev = &client->dev;
|
struct ds1803_data *data;
|
struct iio_dev *indio_dev;
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
|
if (!indio_dev)
|
return -ENOMEM;
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data = iio_priv(indio_dev);
|
data->client = client;
|
data->cfg = &ds1803_cfg[id->driver_data];
|
|
indio_dev->info = &ds1803_info;
|
indio_dev->channels = ds1803_channels;
|
indio_dev->num_channels = ARRAY_SIZE(ds1803_channels);
|
indio_dev->name = client->name;
|
|
return devm_iio_device_register(dev, indio_dev);
|
}
|
|
static const struct of_device_id ds1803_dt_ids[] = {
|
{ .compatible = "maxim,ds1803-010", .data = &ds1803_cfg[DS1803_010] },
|
{ .compatible = "maxim,ds1803-050", .data = &ds1803_cfg[DS1803_050] },
|
{ .compatible = "maxim,ds1803-100", .data = &ds1803_cfg[DS1803_100] },
|
{}
|
};
|
MODULE_DEVICE_TABLE(of, ds1803_dt_ids);
|
|
static const struct i2c_device_id ds1803_id[] = {
|
{ "ds1803-010", DS1803_010 },
|
{ "ds1803-050", DS1803_050 },
|
{ "ds1803-100", DS1803_100 },
|
{}
|
};
|
MODULE_DEVICE_TABLE(i2c, ds1803_id);
|
|
static struct i2c_driver ds1803_driver = {
|
.driver = {
|
.name = "ds1803",
|
.of_match_table = ds1803_dt_ids,
|
},
|
.probe = ds1803_probe,
|
.id_table = ds1803_id,
|
};
|
|
module_i2c_driver(ds1803_driver);
|
|
MODULE_AUTHOR("Slawomir Stepien <sst@poczta.fm>");
|
MODULE_DESCRIPTION("DS1803 digital potentiometer");
|
MODULE_LICENSE("GPL v2");
|
