Freescale Amadeus Plus M5253EVBE board
|
======================================
|
|
Hayden Fraser(Hayden.Fraser@freescale.com)
|
Created 06/05/2007
|
===========================================
|
|
|
1. SWITCH SETTINGS
|
==================
|
1.1 N/A
|
|
|
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
|
===========================================
|
2.1. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
|
linux kernel, you can customize it based on your system requirements:
|
SDR: 0x00000000-0x00ffffff
|
SRAM0: 0x20010000-0x20017fff
|
SRAM1: 0x20000000-0x2000ffff
|
MBAR1: 0x10000000-0x4fffffff
|
MBAR2: 0x80000000-0xCfffffff
|
Flash: 0xffe00000-0xffffffff
|
|
3. DEFINITIONS AND COMPILATION
|
==============================
|
3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h
|
CONFIG_MCF52x2 Processor family
|
CONFIG_MCF5253 MCF5253 specific
|
CONFIG_M5253EVBE Amadeus Plus board specific
|
CONFIG_SYS_CLK Define Amadeus Plus CPU Clock
|
CONFIG_SYS_MBAR MBAR base address
|
CONFIG_SYS_MBAR2 MBAR2 base address
|
|
3.2 Compilation
|
export CROSS_COMPILE=/usr/local/freescale-coldfire-4.1-elf/bin/m68k-elf-
|
cd u-boot-1-2-x
|
make distclean
|
make M5253EVBE_config
|
make
|
|
|
4. SCREEN DUMP
|
==============
|
4.1 U-Boot 1.2.0 (Jun 18 2007 - 18:20:00)
|
|
CPU: Freescale Coldfire MCF5253 at 62 MHz
|
Board: Freescale MCF5253 EVBE
|
DRAM: 16 MB
|
FLASH: 2 MB
|
In: serial
|
Out: serial
|
Err: serial
|
=> flinfo
|
|
Bank # 1: CFI conformant FLASH (16 x 16) Size: 2 MB in 35 Sectors
|
AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x49
|
Erase timeout: 16384 ms, write timeout: 1 ms
|
|
Sector Start Addresses:
|
FFE00000 RO FFE04000 RO FFE06000 RO FFE08000 RO FFE10000 RO
|
FFE20000 FFE30000 FFE40000 FFE50000 FFE60000
|
FFE70000 FFE80000 FFE90000 FFEA0000 FFEB0000
|
FFEC0000 FFED0000 FFEE0000 FFEF0000 FFF00000
|
FFF10000 FFF20000 FFF30000 FFF40000 FFF50000
|
FFF60000 FFF70000 FFF80000 FFF90000 FFFA0000
|
FFFB0000 FFFC0000 FFFD0000 FFFE0000 FFFF0000
|
|
=> bdinfo
|
boot_params = 0x00F62F90
|
memstart = 0x00000000
|
memsize = 0x01000000
|
flashstart = 0xFFE00000
|
flashsize = 0x00200000
|
flashoffset = 0x00000000
|
baudrate = 19200 bps
|
|
=> printenv
|
bootdelay=5
|
baudrate=19200
|
stdin=serial
|
stdout=serial
|
stderr=serial
|
|
Environment size: 134/8188 bytes
|
=> saveenv
|
Saving Environment to Flash...
|
Un-Protected 1 sectors
|
Erasing Flash...
|
. done
|
Erased 1 sectors
|
Writing to Flash... done
|
Protected 1 sectors
|
=>
|
|
5. COMPILER
|
-----------
|
To create U-Boot the CodeSourcery's version of the GNU Toolchain for the ColdFire architecture
|
compiler set (freescale-coldfire-4.1-elf) from www.codesourcery.com was used.
|
You can download it from:http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
|
|
compiler that you used - for example, codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M
|
codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M
|
