* Omnivision OV2775 MIPI CSI-2 sensor
|
|
Required Properties:
|
- compatible: should be "ovti,ov2775"
|
- clocks: reference to the 24M xvclk input clock.
|
- clock-names: should be "xvclk".
|
- dovdd-supply: Digital I/O voltage supply, 1.8 volts
|
- avdd-supply: Analog voltage supply, 2.8 volts
|
- dvdd-supply: Digital core voltage supply, 1.2 volts
|
- reset-gpios: Low active reset gpio
|
- pwd-gpios: Low active pwdn gpio
|
|
The device node must contain one 'port' child node for its digital output
|
video port, in accordance with the video interface bindings defined in
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
Example:
|
|
i2c0@1c22000 {
|
ov2775: ov2775@36 {
|
compatible = "ovti,ov2775";
|
reg = <0x36>;
|
clocks = <&cru CLK_MIPICSI_OUT>;
|
clock-names = "xvclk";
|
power-domains = <&power RV1126_PD_VI>;
|
pinctrl-names = "rockchip,camera_default";
|
pinctrl-0 = <&mipicsi_clk0>;
|
avdd-supply = <&vcc_avdd>;
|
dovdd-supply = <&vcc_dovdd>;
|
dvdd-supply = <&vcc_dvdd>;
|
pwd-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_LOW>;
|
reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
|
rockchip,camera-module-index = <1>;
|
rockchip,camera-module-facing = "front";
|
rockchip,camera-module-name = "default";
|
rockchip,camera-module-lens-name = "default";
|
port {
|
ucam_out0: endpoint {
|
remote-endpoint = <&mipi_in_ucam0>;
|
data-lanes = <1 2 3 4>;
|
};
|
};
|
};
|
};
|
