* galaxycore,gc2093 MIPI sensor
|
|
Required Properties:
|
- compatible: should be "galaxycore,gc2093"
|
- clocks: reference to the 24M xvclk input clock.
|
- clock-names: should be "xvclk".
|
- dovdd-supply: Digital I/O voltage supply, 1.8 volts
|
- avdd-supply: Analog voltage supply, 2.8 volts
|
- dvdd-supply: Digital core voltage supply, 1.2 volts
|
- reset-gpios: Low active reset gpio
|
- pwdn-gpios: High active power-down gpio
|
|
Attention:
|
GC2093 device address 0x37(7bit)
|
|
Example:
|
&i2c1 {
|
status = "okay";
|
gc2093: gc2093@37 {
|
compatible = "galaxycore,gc2093";
|
reg = <0x37>;
|
clocks = <&cru CLK_MIPICSI_OUT>;
|
clock-names = "xvclk";
|
power-domains = <&power RV1126_PD_VI>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&mipicsi_clk0>;
|
pwdn-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
|
reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
|
avdd-supply = <&vcc_avdd>;
|
dovdd-supply = <&vcc_dovdd>;
|
dvdd-supply = <&vcc_dvdd>;
|
rockchip,camera-module-index = <0>;
|
rockchip,camera-module-facing = "front";
|
rockchip,camera-module-name = "YT-RV1109-2-V1";
|
rockchip,camera-module-lens-name = "40IR-2MP-F20";
|
port {
|
ucam_out0: endpoint {
|
remote-endpoint = <&mipi_in_ucam0>;
|
data-lanes = <1 2>;
|
};
|
};
|
};
|
};
|
