1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
| Binding for TI bq2415x Li-Ion Charger
|
| Required properties:
| - compatible: Should contain one of the following:
| * "ti,bq24150"
| * "ti,bq24150"
| * "ti,bq24150a"
| * "ti,bq24151"
| * "ti,bq24151a"
| * "ti,bq24152"
| * "ti,bq24153"
| * "ti,bq24153a"
| * "ti,bq24155"
| * "ti,bq24156"
| * "ti,bq24156a"
| * "ti,bq24158"
| - reg: integer, i2c address of the device.
| - ti,current-limit: integer, initial maximum current charger can pull
| from power supply in mA.
| - ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
| The chip will use slow precharge if battery voltage
| is below this value.
| - ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
| - ti,charge-current: integer, maximum charging current in mA.
| - ti,termination-current: integer, charge will be terminated when current in
| constant-voltage phase drops below this value (in mA).
| - ti,resistor-sense: integer, value of sensing resistor in milliohm.
|
| Optional properties:
| - ti,usb-charger-detection: phandle to usb charger detection device.
| (required for auto mode)
|
| Example from Nokia N900:
|
| bq24150a {
| compatible = "ti,bq24150a";
| reg = <0x6b>;
|
| ti,current-limit = <100>;
| ti,weak-battery-voltage = <3400>;
| ti,battery-regulation-voltage = <4200>;
| ti,charge-current = <650>;
| ti,termination-current = <100>;
| ti,resistor-sense = <68>;
|
| ti,usb-charger-detection = <&isp1704>;
| };
|
|
