Sitronix ST7586 display panel
|
|
Required properties:
|
- compatible: "lego,ev3-lcd".
|
- a0-gpios: The A0 signal (since this binding is for serial mode, this is
|
the pin labeled D1 on the controller, not the pin labeled A0)
|
- reset-gpios: Reset pin
|
|
The node for this driver must be a child node of a SPI controller, hence
|
all mandatory properties described in ../spi/spi-bus.txt must be specified.
|
|
Optional properties:
|
- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
|
|
Example:
|
display@0{
|
compatible = "lego,ev3-lcd";
|
reg = <0>;
|
spi-max-frequency = <10000000>;
|
a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
|
reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
|
};
|
