Update from original Marvell U-Boot to mainline U-Boot:
|
-------------------------------------------------------
|
|
Generate the U-Boot image with these commands:
|
|
$ make clearfog_defconfig
|
$ make
|
|
The resulting image including the SPL binary with the
|
full DDR setup is "u-boot-spl.kwb".
|
|
Now all you need to do is copy this image on a SD card.
|
For example with this command:
|
|
$ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1
|
|
Please use the correct device node for your setup instead
|
of "/dev/sdX" here!
|
