/* 
 | 
 * (C) Copyright 2003 
 | 
 * Thomas.Lange@corelatus.se 
 | 
 * 
 | 
 * SPDX-License-Identifier:    GPL-2.0+ 
 | 
 */ 
 | 
  
 | 
#include <common.h> 
 | 
#include <command.h> 
 | 
#include <mach/au1x00.h> 
 | 
#include <asm/mipsregs.h> 
 | 
#include <asm/io.h> 
 | 
  
 | 
DECLARE_GLOBAL_DATA_PTR; 
 | 
  
 | 
int dram_init(void) 
 | 
{ 
 | 
    /* Sdram is setup by assembler code */ 
 | 
    /* If memory could be changed, we should return the true value here */ 
 | 
    gd->ram_size = 64 * 1024 * 1024; 
 | 
  
 | 
    return 0; 
 | 
} 
 | 
  
 | 
#define BCSR_PCMCIA_PC0DRVEN        0x0010 
 | 
#define BCSR_PCMCIA_PC0RST        0x0080 
 | 
  
 | 
/* In arch/mips/cpu/cpu.c */ 
 | 
void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 ); 
 | 
  
 | 
int checkboard (void) 
 | 
{ 
 | 
#if defined(CONFIG_IDE_PCMCIA) && 0 
 | 
    u16 status; 
 | 
#endif 
 | 
    /* volatile u32 *pcmcia_bcsr = (u32*)(DB1000_BCSR_ADDR+0x10); */ 
 | 
    volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL; 
 | 
    u32 proc_id; 
 | 
  
 | 
    *sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */ 
 | 
  
 | 
    proc_id = read_c0_prid(); 
 | 
  
 | 
    switch (proc_id >> 24) { 
 | 
    case 0: 
 | 
        puts ("Board: Pb1000\n"); 
 | 
        printf ("CPU: Au1000 396 MHz, id: 0x%02x, rev: 0x%02x\n", 
 | 
            (proc_id >> 8) & 0xFF, proc_id & 0xFF); 
 | 
        break; 
 | 
    case 1: 
 | 
        puts ("Board: Pb1500\n"); 
 | 
        printf ("CPU: Au1500, id: 0x%02x, rev: 0x%02x\n", 
 | 
            (proc_id >> 8) & 0xFF, proc_id & 0xFF); 
 | 
        break; 
 | 
    case 2: 
 | 
        puts ("Board: Pb1100\n"); 
 | 
        printf ("CPU: Au1100, id: 0x%02x, rev: 0x%02x\n", 
 | 
            (proc_id >> 8) & 0xFF, proc_id & 0xFF); 
 | 
        break; 
 | 
    default: 
 | 
        printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id); 
 | 
    } 
 | 
  
 | 
    set_io_port_base(0); 
 | 
  
 | 
#if defined(CONFIG_IDE_PCMCIA) && 0 
 | 
    /* Enable 3.3 V on slot 0 ( VCC ) 
 | 
       No 5V */ 
 | 
    status = 4; 
 | 
    *pcmcia_bcsr = status; 
 | 
  
 | 
    status |= BCSR_PCMCIA_PC0DRVEN; 
 | 
    *pcmcia_bcsr = status; 
 | 
    au_sync(); 
 | 
  
 | 
    udelay(300*1000); 
 | 
  
 | 
    status |= BCSR_PCMCIA_PC0RST; 
 | 
    *pcmcia_bcsr = status; 
 | 
    au_sync(); 
 | 
  
 | 
    udelay(100*1000); 
 | 
  
 | 
    /* PCMCIA is on a 36 bit physical address. 
 | 
       We need to map it into a 32 bit addresses */ 
 | 
  
 | 
#if 0 
 | 
    /* We dont need theese unless we run whole pcmcia package */ 
 | 
    write_one_tlb(20,                 /* index */ 
 | 
              0x01ffe000,         /* Pagemask, 16 MB pages */ 
 | 
              CONFIG_SYS_PCMCIA_IO_BASE, /* Hi */ 
 | 
              0x3C000017,         /* Lo0 */ 
 | 
              0x3C200017);        /* Lo1 */ 
 | 
  
 | 
    write_one_tlb(21,                   /* index */ 
 | 
              0x01ffe000,           /* Pagemask, 16 MB pages */ 
 | 
              CONFIG_SYS_PCMCIA_ATTR_BASE, /* Hi */ 
 | 
              0x3D000017,           /* Lo0 */ 
 | 
              0x3D200017);          /* Lo1 */ 
 | 
#endif    /* 0 */ 
 | 
    write_one_tlb(22,                   /* index */ 
 | 
              0x01ffe000,           /* Pagemask, 16 MB pages */ 
 | 
              CONFIG_SYS_PCMCIA_MEM_ADDR,  /* Hi */ 
 | 
              0x3E000017,           /* Lo0 */ 
 | 
              0x3E200017);          /* Lo1 */ 
 | 
#endif    /* CONFIG_IDE_PCMCIA */ 
 | 
  
 | 
    return 0; 
 | 
} 
 |