/*
|
* Novena board support
|
*
|
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
|
*
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
#include <common.h>
|
#include <linux/errno.h>
|
#include <asm/gpio.h>
|
#include <asm/io.h>
|
#include <asm/arch/clock.h>
|
#include <asm/arch/crm_regs.h>
|
#include <asm/arch/imx-regs.h>
|
#include <asm/arch/iomux.h>
|
#include <asm/arch/mxc_hdmi.h>
|
#include <asm/arch/sys_proto.h>
|
#include <asm/mach-imx/boot_mode.h>
|
#include <asm/mach-imx/iomux-v3.h>
|
#include <asm/mach-imx/mxc_i2c.h>
|
#include <asm/mach-imx/sata.h>
|
#include <asm/mach-imx/video.h>
|
#include <fsl_esdhc.h>
|
#include <i2c.h>
|
#include <input.h>
|
#include <ipu_pixfmt.h>
|
#include <linux/fb.h>
|
#include <linux/input.h>
|
#include <malloc.h>
|
#include <micrel.h>
|
#include <miiphy.h>
|
#include <mmc.h>
|
#include <netdev.h>
|
#include <power/pmic.h>
|
#include <power/pfuze100_pmic.h>
|
#include <stdio_dev.h>
|
|
#include "novena.h"
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
/*
|
* GPIO button
|
*/
|
#ifdef CONFIG_KEYBOARD
|
static struct input_config button_input;
|
|
static int novena_gpio_button_read_keys(struct input_config *input)
|
{
|
int key = KEY_ENTER;
|
if (gpio_get_value(NOVENA_BUTTON_GPIO))
|
return 0;
|
input_send_keycodes(&button_input, &key, 1);
|
return 1;
|
}
|
|
static int novena_gpio_button_getc(struct stdio_dev *dev)
|
{
|
return input_getc(&button_input);
|
}
|
|
static int novena_gpio_button_tstc(struct stdio_dev *dev)
|
{
|
return input_tstc(&button_input);
|
}
|
|
static int novena_gpio_button_init(struct stdio_dev *dev)
|
{
|
gpio_direction_input(NOVENA_BUTTON_GPIO);
|
input_set_delays(&button_input, 250, 250);
|
return 0;
|
}
|
|
int drv_keyboard_init(void)
|
{
|
int error;
|
struct stdio_dev dev = {
|
.name = "button",
|
.flags = DEV_FLAGS_INPUT,
|
.start = novena_gpio_button_init,
|
.getc = novena_gpio_button_getc,
|
.tstc = novena_gpio_button_tstc,
|
};
|
|
error = input_init(&button_input, 0);
|
if (error) {
|
debug("%s: Cannot set up input\n", __func__);
|
return -1;
|
}
|
input_add_tables(&button_input, false);
|
button_input.read_keys = novena_gpio_button_read_keys;
|
|
error = input_stdio_register(&dev);
|
if (error)
|
return error;
|
|
return 0;
|
}
|
#endif
|
|
/*
|
* SDHC
|
*/
|
#ifdef CONFIG_FSL_ESDHC
|
static struct fsl_esdhc_cfg usdhc_cfg[] = {
|
{ USDHC3_BASE_ADDR, 0, 4 }, /* Micro SD */
|
{ USDHC2_BASE_ADDR, 0, 4 }, /* Big SD */
|
};
|
|
int board_mmc_getcd(struct mmc *mmc)
|
{
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
/* There is no CD for a microSD card, assume always present. */
|
if (cfg->esdhc_base == USDHC3_BASE_ADDR)
|
return 1;
|
else
|
return !gpio_get_value(NOVENA_SD_CD);
|
}
|
|
int board_mmc_getwp(struct mmc *mmc)
|
{
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
/* There is no WP for a microSD card, assume always read-write. */
|
if (cfg->esdhc_base == USDHC3_BASE_ADDR)
|
return 0;
|
else
|
return gpio_get_value(NOVENA_SD_WP);
|
}
|
|
|
int board_mmc_init(bd_t *bis)
|
{
|
s32 status = 0;
|
int index;
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
|
|
/* Big SD write-protect and card-detect */
|
gpio_direction_input(NOVENA_SD_WP);
|
gpio_direction_input(NOVENA_SD_CD);
|
|
for (index = 0; index < ARRAY_SIZE(usdhc_cfg); index++) {
|
status = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
|
if (status)
|
return status;
|
}
|
|
return status;
|
}
|
#endif
|
|
int board_early_init_f(void)
|
{
|
#if defined(CONFIG_VIDEO_IPUV3)
|
setup_display_clock();
|
#endif
|
|
return 0;
|
}
|
|
int board_init(void)
|
{
|
/* address of boot parameters */
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
#ifdef CONFIG_SATA
|
setup_sata();
|
#endif
|
|
return 0;
|
}
|
|
int board_late_init(void)
|
{
|
#if defined(CONFIG_VIDEO_IPUV3)
|
setup_display_lvds();
|
#endif
|
return 0;
|
}
|
|
int checkboard(void)
|
{
|
puts("Board: Novena 4x\n");
|
return 0;
|
}
|
|
int dram_init(void)
|
{
|
gd->ram_size = imx_ddr_size();
|
return 0;
|
}
|
|
/* setup board specific PMIC */
|
int power_init_board(void)
|
{
|
struct pmic *p;
|
u32 reg;
|
int ret;
|
|
power_pfuze100_init(1);
|
p = pmic_get("PFUZE100");
|
if (!p)
|
return -EINVAL;
|
|
ret = pmic_probe(p);
|
if (ret)
|
return ret;
|
|
pmic_reg_read(p, PFUZE100_DEVICEID, ®);
|
printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
|
|
/* Set SWBST to 5.0V and enable (for USB) */
|
pmic_reg_read(p, PFUZE100_SWBSTCON1, ®);
|
reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
|
reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT));
|
pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
|
|
return 0;
|
}
|
|
/* EEPROM configuration data */
|
struct novena_eeprom_data {
|
uint8_t signature[6];
|
uint8_t version;
|
uint8_t reserved;
|
uint32_t serial;
|
uint8_t mac[6];
|
uint16_t features;
|
};
|
|
int misc_init_r(void)
|
{
|
struct novena_eeprom_data data;
|
uchar *datap = (uchar *)&data;
|
const char *signature = "Novena";
|
int ret;
|
|
/* If 'ethaddr' is already set, do nothing. */
|
if (env_get("ethaddr"))
|
return 0;
|
|
/* EEPROM is at bus 2. */
|
ret = i2c_set_bus_num(2);
|
if (ret) {
|
puts("Cannot select EEPROM I2C bus.\n");
|
return 0;
|
}
|
|
/* EEPROM is at address 0x56. */
|
ret = eeprom_read(0x56, 0, datap, sizeof(data));
|
if (ret) {
|
puts("Cannot read I2C EEPROM.\n");
|
return 0;
|
}
|
|
/* Check EEPROM signature. */
|
if (memcmp(data.signature, signature, 6)) {
|
puts("Invalid I2C EEPROM signature.\n");
|
return 0;
|
}
|
|
/* Set ethernet address from EEPROM. */
|
eth_env_set_enetaddr("ethaddr", data.mac);
|
|
return ret;
|
}
|
