Freescale MCF53017EVB ColdFire Development Board
|
================================================
|
|
TsiChung Liew(Tsi-Chung.Liew@freescale.com)
|
Created 10/22/08
|
===========================================
|
|
|
Changed files:
|
==============
|
|
- board/freescale/m53017evb/m53017evb.c Dram setup
|
- board/freescale/m53017evb/mii.c Mii access
|
- board/freescale/m53017evb/Makefile Makefile
|
- board/freescale/m53017evb/config.mk config make
|
- board/freescale/m53017evb/u-boot.lds Linker description
|
|
- arch/m68k/cpu/mcf532x/cpu.c cpu specific code
|
- arch/m68k/cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
|
- arch/m68k/cpu/mcf532x/interrupts.c cpu specific interrupt support
|
- arch/m68k/cpu/mcf532x/speed.c system, flexbus, and cpu clock
|
- arch/m68k/cpu/mcf532x/Makefile Makefile
|
- arch/m68k/cpu/mcf532x/config.mk config make
|
- arch/m68k/cpu/mcf532x/start.S start up assembly code
|
|
- doc/README.m53017evb This readme file
|
|
- drivers/net/mcffec.c ColdFire common FEC driver
|
- drivers/net/mcfmii.c ColdFire common Mii driver
|
- drivers/serial/mcfuart.c ColdFire common UART driver
|
- drivers/rtc/mcfrtc.c Realtime clock Driver
|
|
- include/asm-m68k/bitops.h Bit operation function export
|
- include/asm-m68k/byteorder.h Byte order functions
|
- include/asm-m68k/fec.h FEC structure and definition
|
- include/asm-m68k/fsl_i2c.h I2C structure and definition
|
- include/asm-m68k/global_data.h Global data structure
|
- include/asm-m68k/immap.h ColdFire specific header file and driver macros
|
- include/asm-m68k/immap_5301x.h mcf5301x specific header file
|
- include/asm-m68k/io.h io functions
|
- include/asm-m68k/m532x.h mcf5301x specific header file
|
- include/asm-m68k/posix_types.h Posix
|
- include/asm-m68k/processor.h header file
|
- include/asm-m68k/ptrace.h Exception structure
|
- include/asm-m68k/rtc.h Realtime clock header file
|
- include/asm-m68k/string.h String function export
|
- include/asm-m68k/timer.h Timer structure and definition
|
- include/asm-m68k/types.h Data types definition
|
- include/asm-m68k/uart.h Uart structure and definition
|
- include/asm-m68k/u-boot.h U-Boot structure
|
|
- include/configs/M53017EVB.h Board specific configuration file
|
|
- arch/m68k/lib/board.c board init function
|
- arch/m68k/lib/cache.c
|
- arch/m68k/lib/interrupts Coldfire common interrupt functions
|
- arch/m68k/lib/m68k_linux.c
|
- arch/m68k/lib/time.c Timer functions (Dma timer and PIT)
|
- arch/m68k/lib/traps.c Exception init code
|
|
1 MCF5301x specific Options/Settings
|
====================================
|
1.1 pre-loader is no longer suppoer in thie coldfire family
|
|
1.2 Configuration settings for M53017EVB Development Board
|
CONFIG_MCF5301x -- define for all MCF5301x CPUs
|
CONFIG_M53015 -- define for MCF53015 CPUs
|
CONFIG_M53017EVB -- define for M53017EVB board
|
|
CONFIG_MCFUART -- define to use common CF Uart driver
|
CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
|
CONFIG_BAUDRATE -- define UART baudrate
|
|
CONFIG_MCFRTC -- define to use common CF RTC driver
|
CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
|
CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
|
RTC_DEBUG -- define to show RTC debug message
|
CONFIG_CMD_DATE -- enable to use date feature in U-Boot
|
|
CONFIG_MCFFEC -- define to use common CF FEC driver
|
CONFIG_MII -- enable to use MII driver
|
CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
|
CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
|
CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
|
CONFIG_SYS_FAULT_ECHO_LINK_DOWN --
|
CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
|
CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
|
MCFFEC_TOUT_LOOP -- set FEC timeout loop
|
|
CONFIG_MCFTMR -- define to use DMA timer
|
CONFIG_MCFPIT -- define to use PIT timer
|
|
CONFIG_SYS_I2C_FSL -- define to use FSL common I2C driver
|
CONFIG_SYS_I2C_SOFT -- define for I2C bit-banged
|
CONFIG_SYS_I2C_SPEED -- define for I2C speed
|
CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
|
CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
|
CONFIG_SYS_IMMR -- define for MBAR offset
|
|
CONFIG_SYS_MBAR -- define MBAR offset
|
|
CONFIG_MONITOR_IS_IN_RAM -- Not support
|
|
CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM
|
|
CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
|
CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
|
CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
|
|
CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
|
|
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
|
===========================================
|
2.1. System memory map:
|
Flash: 0x00000000-0x3FFFFFFF (1024MB)
|
DDR: 0x40000000-0x7FFFFFFF (1024MB)
|
SRAM: 0x80000000-0x8FFFFFFF (256MB)
|
IP: 0xFC000000-0xFFFFFFFF (256MB)
|
|
2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
|
linux kernel, you can customize it based on your system requirements:
|
Flash0: 0x00000000-0x00FFFFFF (16MB)
|
DDR: 0x40000000-0x4FFFFFFF (256MB)
|
SRAM: 0x80000000-0x80007FFF (32KB)
|
IP: 0xFC000000-0xFC0FFFFF (64KB)
|
|
3. COMPILATION
|
==============
|
3.1 To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or
|
uClinux version) from codesourcery.com was used. Download it from:
|
http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
|
|
3.2 Compilation
|
export CROSS_COMPILE=cross-compile-prefix
|
cd u-boot
|
make distclean
|
make M53017EVB_config
|
make
|
|
4. SCREEN DUMP
|
==============
|
4.1 M53017EVB Development board
|
(NOTE: May not show exactly the same)
|
|
U-Boot 2008.10 (Oct 22 2007 - 11:07:57)
|
|
CPU: Freescale MCF53015 (Mask:76 Version:0)
|
CPU CLK 240 Mhz BUS CLK 80 Mhz
|
Board: Freescale M53017EVB
|
I2C: ready
|
DRAM: 64 MB
|
FLASH: 16 MB
|
In: serial
|
Out: serial
|
Err: serial
|
NAND: 16 MiB
|
Net: FEC0, FEC1
|
-> print
|
bootdelay=1
|
baudrate=115200
|
ethaddr=00:e0:0c:bc:e5:60
|
hostname=M53017EVB
|
netdev=eth0
|
loadaddr=40010000
|
u-boot=u-boot.bin
|
load=tftp ${loadaddr) ${u-boot}
|
upd=run load; run prog
|
prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
|
gatewayip=192.168.1.1
|
netmask=255.255.255.0
|
ipaddr=192.168.1.3
|
serverip=192.168.1.2
|
stdin=serial
|
stdout=serial
|
stderr=serial
|
mem=65024k
|
|
Environment size: 437/4092 bytes
|
->
|
