/*
|
* (C) Copyright 2009
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de
|
*
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
#include <common.h>
|
#include <nand.h>
|
#include <asm/io.h>
|
|
#define CONFIG_NAND_MODE_REG (void *)(CONFIG_SYS_NAND_BASE + 0x20000)
|
#define CONFIG_NAND_DATA_REG (void *)(CONFIG_SYS_NAND_BASE + 0x30000)
|
|
#define read_mode() in_8(CONFIG_NAND_MODE_REG)
|
#define write_mode(val) out_8(CONFIG_NAND_MODE_REG, val)
|
#define read_data() in_8(CONFIG_NAND_DATA_REG)
|
#define write_data(val) out_8(CONFIG_NAND_DATA_REG, val)
|
|
#define KPN_RDY2 (1 << 7)
|
#define KPN_RDY1 (1 << 6)
|
#define KPN_WPN (1 << 4)
|
#define KPN_CE2N (1 << 3)
|
#define KPN_CE1N (1 << 2)
|
#define KPN_ALE (1 << 1)
|
#define KPN_CLE (1 << 0)
|
|
#define KPN_DEFAULT_CHIP_DELAY 50
|
|
static int kpn_chip_ready(void)
|
{
|
if (read_mode() & KPN_RDY1)
|
return 1;
|
|
return 0;
|
}
|
|
static void kpn_wait_rdy(void)
|
{
|
int cnt = 1000000;
|
|
while (--cnt && !kpn_chip_ready())
|
udelay(1);
|
|
if (!cnt)
|
printf ("timeout while waiting for RDY\n");
|
}
|
|
static void kpn_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
{
|
u8 reg_val = read_mode();
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
reg_val = reg_val & ~(KPN_ALE + KPN_CLE);
|
|
if (ctrl & NAND_CLE)
|
reg_val = reg_val | KPN_CLE;
|
if (ctrl & NAND_ALE)
|
reg_val = reg_val | KPN_ALE;
|
if (ctrl & NAND_NCE)
|
reg_val = reg_val & ~KPN_CE1N;
|
else
|
reg_val = reg_val | KPN_CE1N;
|
|
write_mode(reg_val);
|
}
|
if (cmd != NAND_CMD_NONE)
|
write_data(cmd);
|
|
/* wait until flash is ready */
|
kpn_wait_rdy();
|
}
|
|
static u_char kpn_nand_read_byte(struct mtd_info *mtd)
|
{
|
return read_data();
|
}
|
|
static void kpn_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
|
{
|
int i;
|
|
for (i = 0; i < len; i++) {
|
write_data(buf[i]);
|
kpn_wait_rdy();
|
}
|
}
|
|
static void kpn_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
|
{
|
int i;
|
|
for (i = 0; i < len; i++)
|
buf[i] = read_data();
|
}
|
|
static int kpn_nand_dev_ready(struct mtd_info *mtd)
|
{
|
kpn_wait_rdy();
|
|
return 1;
|
}
|
|
int board_nand_init(struct nand_chip *nand)
|
{
|
#if defined(CONFIG_NAND_ECC_BCH)
|
nand->ecc.mode = NAND_ECC_SOFT_BCH;
|
#else
|
nand->ecc.mode = NAND_ECC_SOFT;
|
#endif
|
|
/* Reference hardware control function */
|
nand->cmd_ctrl = kpn_nand_hwcontrol;
|
nand->read_byte = kpn_nand_read_byte;
|
nand->write_buf = kpn_nand_write_buf;
|
nand->read_buf = kpn_nand_read_buf;
|
nand->dev_ready = kpn_nand_dev_ready;
|
nand->chip_delay = KPN_DEFAULT_CHIP_DELAY;
|
|
/* reset mode register */
|
write_mode(KPN_CE1N + KPN_CE2N + KPN_WPN);
|
return 0;
|
}
|
