// SPDX-License-Identifier: GPL-2.0
|
/*
|
* FB driver for the NHD-1.69-160128UGC3 (Newhaven Display International, Inc.)
|
* using the SEPS525 (Syncoam) LCD Controller
|
*
|
* Copyright (C) 2016 Analog Devices Inc.
|
*
|
* This program is free software; you can redistribute it and/or modify
|
* it under the terms of the GNU General Public License as published by
|
* the Free Software Foundation; either version 2 of the License, or
|
* (at your option) any later version.
|
*
|
* This program is distributed in the hope that it will be useful,
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
* GNU General Public License for more details.
|
*/
|
|
#include <linux/module.h>
|
#include <linux/kernel.h>
|
#include <linux/init.h>
|
#include <linux/gpio.h>
|
#include <linux/delay.h>
|
|
#include "fbtft.h"
|
|
#define DRVNAME "fb_seps525"
|
#define WIDTH 160
|
#define HEIGHT 128
|
|
#define SEPS525_INDEX 0x00
|
#define SEPS525_STATUS_RD 0x01
|
#define SEPS525_OSC_CTL 0x02
|
#define SEPS525_IREF 0x80
|
#define SEPS525_CLOCK_DIV 0x03
|
#define SEPS525_REDUCE_CURRENT 0x04
|
#define SEPS525_SOFT_RST 0x05
|
#define SEPS525_DISP_ONOFF 0x06
|
#define SEPS525_PRECHARGE_TIME_R 0x08
|
#define SEPS525_PRECHARGE_TIME_G 0x09
|
#define SEPS525_PRECHARGE_TIME_B 0x0A
|
#define SEPS525_PRECHARGE_CURRENT_R 0x0B
|
#define SEPS525_PRECHARGE_CURRENT_G 0x0C
|
#define SEPS525_PRECHARGE_CURRENT_B 0x0D
|
#define SEPS525_DRIVING_CURRENT_R 0x10
|
#define SEPS525_DRIVING_CURRENT_G 0x11
|
#define SEPS525_DRIVING_CURRENT_B 0x12
|
#define SEPS525_DISPLAYMODE_SET 0x13
|
#define SEPS525_RGBIF 0x14
|
#define SEPS525_RGB_POL 0x15
|
#define SEPS525_MEMORY_WRITEMODE 0x16
|
#define SEPS525_MX1_ADDR 0x17
|
#define SEPS525_MX2_ADDR 0x18
|
#define SEPS525_MY1_ADDR 0x19
|
#define SEPS525_MY2_ADDR 0x1A
|
#define SEPS525_MEMORY_ACCESS_POINTER_X 0x20
|
#define SEPS525_MEMORY_ACCESS_POINTER_Y 0x21
|
#define SEPS525_DDRAM_DATA_ACCESS_PORT 0x22
|
#define SEPS525_GRAY_SCALE_TABLE_INDEX 0x50
|
#define SEPS525_GRAY_SCALE_TABLE_DATA 0x51
|
#define SEPS525_DUTY 0x28
|
#define SEPS525_DSL 0x29
|
#define SEPS525_D1_DDRAM_FAC 0x2E
|
#define SEPS525_D1_DDRAM_FAR 0x2F
|
#define SEPS525_D2_DDRAM_SAC 0x31
|
#define SEPS525_D2_DDRAM_SAR 0x32
|
#define SEPS525_SCR1_FX1 0x33
|
#define SEPS525_SCR1_FX2 0x34
|
#define SEPS525_SCR1_FY1 0x35
|
#define SEPS525_SCR1_FY2 0x36
|
#define SEPS525_SCR2_SX1 0x37
|
#define SEPS525_SCR2_SX2 0x38
|
#define SEPS525_SCR2_SY1 0x39
|
#define SEPS525_SCR2_SY2 0x3A
|
#define SEPS525_SCREEN_SAVER_CONTEROL 0x3B
|
#define SEPS525_SS_SLEEP_TIMER 0x3C
|
#define SEPS525_SCREEN_SAVER_MODE 0x3D
|
#define SEPS525_SS_SCR1_FU 0x3E
|
#define SEPS525_SS_SCR1_MXY 0x3F
|
#define SEPS525_SS_SCR2_FU 0x40
|
#define SEPS525_SS_SCR2_MXY 0x41
|
#define SEPS525_MOVING_DIRECTION 0x42
|
#define SEPS525_SS_SCR2_SX1 0x47
|
#define SEPS525_SS_SCR2_SX2 0x48
|
#define SEPS525_SS_SCR2_SY1 0x49
|
#define SEPS525_SS_SCR2_SY2 0x4A
|
|
/* SEPS525_DISPLAYMODE_SET */
|
#define MODE_SWAP_BGR BIT(7)
|
#define MODE_SM BIT(6)
|
#define MODE_RD BIT(5)
|
#define MODE_CD BIT(4)
|
|
#define seps525_use_window 0 /* FBTFT doesn't really use it today */
|
|
/* Init sequence taken from: Arduino Library for the Adafruit 2.2" display */
|
static int init_display(struct fbtft_par *par)
|
{
|
par->fbtftops.reset(par);
|
|
usleep_range(1000, 5000);
|
|
/* Disable Oscillator Power Down */
|
write_reg(par, SEPS525_REDUCE_CURRENT, 0x03);
|
usleep_range(1000, 5000);
|
/* Set Normal Driving Current */
|
write_reg(par, SEPS525_REDUCE_CURRENT, 0x00);
|
usleep_range(1000, 5000);
|
|
write_reg(par, SEPS525_SCREEN_SAVER_CONTEROL, 0x00);
|
/* Set EXPORT1 Pin at Internal Clock */
|
write_reg(par, SEPS525_OSC_CTL, 0x01);
|
/* Set Clock as 120 Frames/Sec */
|
write_reg(par, SEPS525_CLOCK_DIV, 0x90);
|
/* Set Reference Voltage Controlled by External Resister */
|
write_reg(par, SEPS525_IREF, 0x01);
|
|
/* precharge time R G B */
|
write_reg(par, SEPS525_PRECHARGE_TIME_R, 0x04);
|
write_reg(par, SEPS525_PRECHARGE_TIME_G, 0x05);
|
write_reg(par, SEPS525_PRECHARGE_TIME_B, 0x05);
|
|
/* precharge current R G B (uA) */
|
write_reg(par, SEPS525_PRECHARGE_CURRENT_R, 0x9D);
|
write_reg(par, SEPS525_PRECHARGE_CURRENT_G, 0x8C);
|
write_reg(par, SEPS525_PRECHARGE_CURRENT_B, 0x57);
|
|
/* driving current R G B (uA) */
|
write_reg(par, SEPS525_DRIVING_CURRENT_R, 0x56);
|
write_reg(par, SEPS525_DRIVING_CURRENT_G, 0x4D);
|
write_reg(par, SEPS525_DRIVING_CURRENT_B, 0x46);
|
/* Set Color Sequence */
|
write_reg(par, SEPS525_DISPLAYMODE_SET, 0xA0);
|
write_reg(par, SEPS525_RGBIF, 0x01); /* Set MCU Interface Mode */
|
/* Set Memory Write Mode */
|
write_reg(par, SEPS525_MEMORY_WRITEMODE, 0x66);
|
write_reg(par, SEPS525_DUTY, 0x7F); /* 1/128 Duty (0x0F~0x7F) */
|
/* Set Mapping RAM Display Start Line (0x00~0x7F) */
|
write_reg(par, SEPS525_DSL, 0x00);
|
write_reg(par, SEPS525_DISP_ONOFF, 0x01); /* Display On (0x00/0x01) */
|
/* Set All Internal Register Value as Normal Mode */
|
write_reg(par, SEPS525_SOFT_RST, 0x00);
|
/* Set RGB Interface Polarity as Active Low */
|
write_reg(par, SEPS525_RGB_POL, 0x00);
|
|
write_reg(par, SEPS525_DDRAM_DATA_ACCESS_PORT);
|
|
return 0;
|
}
|
|
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
|
{
|
if (seps525_use_window) {
|
/* Set Window Xs,Ys Xe,Ye*/
|
write_reg(par, SEPS525_MX1_ADDR, xs);
|
write_reg(par, SEPS525_MX2_ADDR, xe);
|
write_reg(par, SEPS525_MY1_ADDR, ys);
|
write_reg(par, SEPS525_MY2_ADDR, ye);
|
}
|
/* start position X,Y */
|
write_reg(par, SEPS525_MEMORY_ACCESS_POINTER_X, xs);
|
write_reg(par, SEPS525_MEMORY_ACCESS_POINTER_Y, ys);
|
|
write_reg(par, SEPS525_DDRAM_DATA_ACCESS_PORT);
|
}
|
|
static int set_var(struct fbtft_par *par)
|
{
|
u8 val;
|
|
switch (par->info->var.rotate) {
|
case 0:
|
val = 0;
|
break;
|
case 180:
|
val = MODE_RD | MODE_CD;
|
break;
|
case 90:
|
case 270:
|
|
default:
|
return -EINVAL;
|
}
|
/* Memory Access Control */
|
write_reg(par, SEPS525_DISPLAYMODE_SET, val |
|
(par->bgr ? MODE_SWAP_BGR : 0));
|
|
write_reg(par, SEPS525_DDRAM_DATA_ACCESS_PORT);
|
|
return 0;
|
}
|
|
static struct fbtft_display display = {
|
.regwidth = 8,
|
.width = WIDTH,
|
.height = HEIGHT,
|
.fbtftops = {
|
.init_display = init_display,
|
.set_addr_win = set_addr_win,
|
.set_var = set_var,
|
},
|
};
|
|
FBTFT_REGISTER_DRIVER(DRVNAME, "syncoam,seps525", &display);
|
|
MODULE_ALIAS("spi:" DRVNAME);
|
MODULE_ALIAS("platform:" DRVNAME);
|
MODULE_ALIAS("spi:seps525");
|
MODULE_ALIAS("platform:seps525");
|
|
MODULE_DESCRIPTION("FB driver for the SEPS525 LCD Controller");
|
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
|
MODULE_LICENSE("GPL");
|
