/* SPDX-License-Identifier: GPL-2.0-only */
|
/*
|
* linux/arch/arm/mm/proc-sa1100.S
|
*
|
* Copyright (C) 1997-2002 Russell King
|
* hacked for non-paged-MM by Hyok S. Choi, 2003.
|
*
|
* MMU functions for SA110
|
*
|
* These are the low level assembler for performing cache and TLB
|
* functions on the StrongARM-1100 and StrongARM-1110.
|
*
|
* Note that SA1100 and SA1110 share everything but their name and CPU ID.
|
*
|
* 12-jun-2000, Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
|
* Flush the read buffer at context switches
|
*/
|
#include <linux/linkage.h>
|
#include <linux/init.h>
|
#include <linux/pgtable.h>
|
#include <asm/assembler.h>
|
#include <asm/asm-offsets.h>
|
#include <asm/hwcap.h>
|
#include <mach/hardware.h>
|
#include <asm/pgtable-hwdef.h>
|
|
#include "proc-macros.S"
|
|
/*
|
* the cache line size of the I and D cache
|
*/
|
#define DCACHELINESIZE 32
|
|
.section .text
|
|
/*
|
* cpu_sa1100_proc_init()
|
*/
|
ENTRY(cpu_sa1100_proc_init)
|
mov r0, #0
|
mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching
|
mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland
|
ret lr
|
|
/*
|
* cpu_sa1100_proc_fin()
|
*
|
* Prepare the CPU for reset:
|
* - Disable interrupts
|
* - Clean and turn off caches.
|
*/
|
ENTRY(cpu_sa1100_proc_fin)
|
mcr p15, 0, ip, c15, c2, 2 @ Disable clock switching
|
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
|
bic r0, r0, #0x1000 @ ...i............
|
bic r0, r0, #0x000e @ ............wca.
|
mcr p15, 0, r0, c1, c0, 0 @ disable caches
|
ret lr
|
|
/*
|
* cpu_sa1100_reset(loc)
|
*
|
* Perform a soft reset of the system. Put the CPU into the
|
* same state as it would be if it had been reset, and branch
|
* to what would be the reset vector.
|
*
|
* loc: location to jump to for soft reset
|
*/
|
.align 5
|
.pushsection .idmap.text, "ax"
|
ENTRY(cpu_sa1100_reset)
|
mov ip, #0
|
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
#ifdef CONFIG_MMU
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
|
#endif
|
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
|
bic ip, ip, #0x000f @ ............wcam
|
bic ip, ip, #0x1100 @ ...i...s........
|
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
|
ret r0
|
ENDPROC(cpu_sa1100_reset)
|
.popsection
|
|
/*
|
* cpu_sa1100_do_idle(type)
|
*
|
* Cause the processor to idle
|
*
|
* type: call type:
|
* 0 = slow idle
|
* 1 = fast idle
|
* 2 = switch to slow processor clock
|
* 3 = switch to fast processor clock
|
*/
|
.align 5
|
ENTRY(cpu_sa1100_do_idle)
|
mov r0, r0 @ 4 nop padding
|
mov r0, r0
|
mov r0, r0
|
mov r0, r0 @ 4 nop padding
|
mov r0, r0
|
mov r0, r0
|
mov r0, #0
|
ldr r1, =UNCACHEABLE_ADDR @ ptr to uncacheable address
|
@ --- aligned to a cache line
|
mcr p15, 0, r0, c15, c2, 2 @ disable clock switching
|
ldr r1, [r1, #0] @ force switch to MCLK
|
mcr p15, 0, r0, c15, c8, 2 @ wait for interrupt
|
mov r0, r0 @ safety
|
mcr p15, 0, r0, c15, c1, 2 @ enable clock switching
|
ret lr
|
|
/* ================================= CACHE ================================ */
|
|
/*
|
* cpu_sa1100_dcache_clean_area(addr,sz)
|
*
|
* Clean the specified entry of any caches such that the MMU
|
* translation fetches will obtain correct data.
|
*
|
* addr: cache-unaligned virtual address
|
*/
|
.align 5
|
ENTRY(cpu_sa1100_dcache_clean_area)
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
add r0, r0, #DCACHELINESIZE
|
subs r1, r1, #DCACHELINESIZE
|
bhi 1b
|
ret lr
|
|
/* =============================== PageTable ============================== */
|
|
/*
|
* cpu_sa1100_switch_mm(pgd)
|
*
|
* Set the translation base pointer to be as described by pgd.
|
*
|
* pgd: new page tables
|
*/
|
.align 5
|
ENTRY(cpu_sa1100_switch_mm)
|
#ifdef CONFIG_MMU
|
str lr, [sp, #-4]!
|
bl v4wb_flush_kern_cache_all @ clears IP
|
mcr p15, 0, ip, c9, c0, 0 @ invalidate RB
|
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
|
ldr pc, [sp], #4
|
#else
|
ret lr
|
#endif
|
|
/*
|
* cpu_sa1100_set_pte_ext(ptep, pte, ext)
|
*
|
* Set a PTE and flush it out
|
*/
|
.align 5
|
ENTRY(cpu_sa1100_set_pte_ext)
|
#ifdef CONFIG_MMU
|
armv3_set_pte_ext wc_disable=0
|
mov r0, r0
|
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
#endif
|
ret lr
|
|
.globl cpu_sa1100_suspend_size
|
.equ cpu_sa1100_suspend_size, 4 * 3
|
#ifdef CONFIG_ARM_CPU_SUSPEND
|
ENTRY(cpu_sa1100_do_suspend)
|
stmfd sp!, {r4 - r6, lr}
|
mrc p15, 0, r4, c3, c0, 0 @ domain ID
|
mrc p15, 0, r5, c13, c0, 0 @ PID
|
mrc p15, 0, r6, c1, c0, 0 @ control reg
|
stmia r0, {r4 - r6} @ store cp regs
|
ldmfd sp!, {r4 - r6, pc}
|
ENDPROC(cpu_sa1100_do_suspend)
|
|
ENTRY(cpu_sa1100_do_resume)
|
ldmia r0, {r4 - r6} @ load cp regs
|
mov ip, #0
|
mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs
|
mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache
|
mcr p15, 0, ip, c9, c0, 0 @ invalidate RB
|
mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB
|
|
mcr p15, 0, r4, c3, c0, 0 @ domain ID
|
mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
|
mcr p15, 0, r5, c13, c0, 0 @ PID
|
mov r0, r6 @ control register
|
b cpu_resume_mmu
|
ENDPROC(cpu_sa1100_do_resume)
|
#endif
|
|
.type __sa1100_setup, #function
|
__sa1100_setup:
|
mov r0, #0
|
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
|
#ifdef CONFIG_MMU
|
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
|
#endif
|
adr r5, sa1100_crval
|
ldmia r5, {r5, r6}
|
mrc p15, 0, r0, c1, c0 @ get control register v4
|
bic r0, r0, r5
|
orr r0, r0, r6
|
ret lr
|
.size __sa1100_setup, . - __sa1100_setup
|
|
/*
|
* R
|
* .RVI ZFRS BLDP WCAM
|
* ..11 0001 ..11 1101
|
*
|
*/
|
.type sa1100_crval, #object
|
sa1100_crval:
|
crval clear=0x00003f3f, mmuset=0x0000313d, ucset=0x00001130
|
|
__INITDATA
|
|
/*
|
* SA1100 and SA1110 share the same function calls
|
*/
|
|
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
|
define_processor_functions sa1100, dabort=v4_early_abort, pabort=legacy_pabort, suspend=1
|
|
.section ".rodata"
|
|
string cpu_arch_name, "armv4"
|
string cpu_elf_name, "v4"
|
string cpu_sa1100_name, "StrongARM-1100"
|
string cpu_sa1110_name, "StrongARM-1110"
|
|
.align
|
|
.section ".proc.info.init", "a"
|
|
.macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
|
.type __\name\()_proc_info,#object
|
__\name\()_proc_info:
|
.long \cpu_val
|
.long \cpu_mask
|
.long PMD_TYPE_SECT | \
|
PMD_SECT_BUFFERABLE | \
|
PMD_SECT_CACHEABLE | \
|
PMD_SECT_AP_WRITE | \
|
PMD_SECT_AP_READ
|
.long PMD_TYPE_SECT | \
|
PMD_SECT_AP_WRITE | \
|
PMD_SECT_AP_READ
|
initfn __sa1100_setup, __\name\()_proc_info
|
.long cpu_arch_name
|
.long cpu_elf_name
|
.long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
|
.long \cpu_name
|
.long sa1100_processor_functions
|
.long v4wb_tlb_fns
|
.long v4_mc_user_fns
|
.long v4wb_cache_fns
|
.size __\name\()_proc_info, . - __\name\()_proc_info
|
.endm
|
|
sa1100_proc_info sa1100, 0x4401a110, 0xfffffff0, cpu_sa1100_name
|
sa1100_proc_info sa1110, 0x6901b110, 0xfffffff0, cpu_sa1110_name
|
