Mixel DSI PHY for i.MX8
|
|
The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
|
MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
|
electrical signals for DSI.
|
|
Required properties:
|
- compatible: Must be:
|
- "fsl,imx8mq-mipi-dphy"
|
- clocks: Must contain an entry for each entry in clock-names.
|
- clock-names: Must contain the following entries:
|
- "phy_ref": phandle and specifier referring to the DPHY ref clock
|
- reg: the register range of the PHY controller
|
- #phy-cells: number of cells in PHY, as defined in
|
Documentation/devicetree/bindings/phy/phy-bindings.txt
|
this must be <0>
|
|
Optional properties:
|
- power-domains: phandle to power domain
|
|
Example:
|
dphy: dphy@30a0030 {
|
compatible = "fsl,imx8mq-mipi-dphy";
|
clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
|
clock-names = "phy_ref";
|
reg = <0x30a00300 0x100>;
|
power-domains = <&pd_mipi0>;
|
#phy-cells = <0>;
|
};
|
