# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
%YAML 1.2
|
---
|
$id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
title: Freescale General-Purpose Media Interface (GPMI) binding
|
|
maintainers:
|
- Han Xu <han.xu@nxp.com>
|
|
allOf:
|
- $ref: "nand-controller.yaml"
|
|
description: |
|
The GPMI nand controller provides an interface to control the NAND
|
flash chips. The device tree may optionally contain sub-nodes
|
describing partitions of the address space. See partition.txt for
|
more detail.
|
|
properties:
|
compatible:
|
oneOf:
|
- enum:
|
- fsl,imx23-gpmi-nand
|
- fsl,imx28-gpmi-nand
|
- fsl,imx6q-gpmi-nand
|
- fsl,imx6sx-gpmi-nand
|
- fsl,imx7d-gpmi-nand
|
- items:
|
- enum:
|
- fsl,imx8mm-gpmi-nand
|
- fsl,imx8mn-gpmi-nand
|
- const: fsl,imx7d-gpmi-nand
|
|
reg:
|
items:
|
- description: Address and length of gpmi block.
|
- description: Address and length of bch block.
|
|
reg-names:
|
items:
|
- const: gpmi-nand
|
- const: bch
|
|
interrupts:
|
maxItems: 1
|
|
interrupt-names:
|
const: bch
|
|
dmas:
|
maxItems: 1
|
|
dma-names:
|
const: rx-tx
|
|
clocks:
|
minItems: 1
|
maxItems: 5
|
items:
|
- description: SoC gpmi io clock
|
- description: SoC gpmi apb clock
|
- description: SoC gpmi bch clock
|
- description: SoC gpmi bch apb clock
|
- description: SoC per1 bch clock
|
|
clock-names:
|
minItems: 1
|
maxItems: 5
|
items:
|
- const: gpmi_io
|
- const: gpmi_apb
|
- const: gpmi_bch
|
- const: gpmi_bch_apb
|
- const: per1_bch
|
|
fsl,use-minimum-ecc:
|
type: boolean
|
description: |
|
Protect this NAND flash with the minimum ECC strength required.
|
The required ECC strength is automatically discoverable for some
|
flash (e.g., according to the ONFI standard). However, note that
|
if this strength is not discoverable or this property is not enabled,
|
the software may chooses an implementation-defined ECC scheme.
|
|
fsl,no-blockmark-swap:
|
type: boolean
|
description: |
|
Don't swap the bad block marker from the OOB area with the byte in
|
the data area but rely on the flash based BBT for identifying bad blocks.
|
NOTE: this is only valid in conjunction with 'nand-on-flash-bbt'.
|
WARNING: on i.MX28 blockmark swapping cannot be disabled for the BootROM
|
in the FCB. Thus, partitions written from Linux with this feature turned
|
on may not be accessible by the BootROM code.
|
|
required:
|
- compatible
|
- reg
|
- reg-names
|
- interrupts
|
- interrupt-names
|
- clocks
|
- clock-names
|
- dmas
|
- dma-names
|
|
unevaluatedProperties: false
|
|
examples:
|
- |
|
nand-controller@8000c000 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
compatible = "fsl,imx28-gpmi-nand";
|
reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
|
reg-names = "gpmi-nand", "bch";
|
interrupts = <41>;
|
interrupt-names = "bch";
|
clocks = <&clks 50>;
|
clock-names = "gpmi_io";
|
dmas = <&dma_apbh 4>;
|
dma-names = "rx-tx";
|
};
|
