# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
# Copyright 2019 Analog Devices Inc.
|
%YAML 1.2
|
---
|
$id: http://devicetree.org/schemas/iio/adc/adi,ad7192.yaml#
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
title: Analog Devices AD7192 ADC device driver
|
|
maintainers:
|
- Michael Hennerich <michael.hennerich@analog.com>
|
|
description: |
|
Bindings for the Analog Devices AD7192 ADC device. Datasheet can be
|
found here:
|
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7192.pdf
|
|
properties:
|
compatible:
|
enum:
|
- adi,ad7190
|
- adi,ad7192
|
- adi,ad7193
|
- adi,ad7195
|
|
reg:
|
maxItems: 1
|
|
spi-cpol: true
|
|
spi-cpha: true
|
|
spi-max-frequency: true
|
|
clocks:
|
maxItems: 1
|
description: phandle to the master clock (mclk)
|
|
clock-names:
|
items:
|
- const: mclk
|
|
interrupts:
|
maxItems: 1
|
|
dvdd-supply:
|
description: DVdd voltage supply
|
|
avdd-supply:
|
description: AVdd voltage supply
|
|
adi,rejection-60-Hz-enable:
|
description: |
|
This bit enables a notch at 60 Hz when the first notch of the sinc
|
filter is at 50 Hz. When REJ60 is set, a filter notch is placed at
|
60 Hz when the sinc filter first notch is at 50 Hz. This allows
|
simultaneous 50 Hz/ 60 Hz rejection.
|
type: boolean
|
|
adi,refin2-pins-enable:
|
description: |
|
External reference applied between the P1/REFIN2(+) and P0/REFIN2(−) pins.
|
type: boolean
|
|
adi,buffer-enable:
|
description: |
|
Enables the buffer on the analog inputs. If cleared, the analog inputs
|
are unbuffered, lowering the power consumption of the device. If this
|
bit is set, the analog inputs are buffered, allowing the user to place
|
source impedances on the front end without contributing gain errors to
|
the system.
|
type: boolean
|
|
adi,burnout-currents-enable:
|
description: |
|
When this bit is set to 1, the 500 nA current sources in the signal
|
path are enabled. When BURN = 0, the burnout currents are disabled.
|
The burnout currents can be enabled only when the buffer is active
|
and when chop is disabled.
|
type: boolean
|
|
bipolar:
|
description: see Documentation/devicetree/bindings/iio/adc/adc.txt
|
type: boolean
|
|
required:
|
- compatible
|
- reg
|
- clocks
|
- clock-names
|
- interrupts
|
- dvdd-supply
|
- avdd-supply
|
- spi-cpol
|
- spi-cpha
|
|
additionalProperties: false
|
|
examples:
|
- |
|
spi0 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
adc@0 {
|
compatible = "adi,ad7192";
|
reg = <0>;
|
spi-max-frequency = <1000000>;
|
spi-cpol;
|
spi-cpha;
|
clocks = <&ad7192_mclk>;
|
clock-names = "mclk";
|
interrupts = <25 0x2>;
|
interrupt-parent = <&gpio>;
|
dvdd-supply = <&dvdd>;
|
avdd-supply = <&avdd>;
|
|
adi,refin2-pins-enable;
|
adi,rejection-60-Hz-enable;
|
adi,buffer-enable;
|
adi,burnout-currents-enable;
|
};
|
};
|
