# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
%YAML 1.2
|
---
|
|
$id: http://devicetree.org/schemas/hwmon/ti,tmp513.yaml#
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
title: TMP513/512 system monitor sensor
|
|
maintainers:
|
- Eric Tremblay <etremblay@distech-controls.com>
|
|
description: |
|
The TMP512 (dual-channel) and TMP513 (triple-channel) are system monitors
|
that include remote sensors, a local temperature sensor, and a high-side
|
current shunt monitor. These system monitors have the capability of measuring
|
remote temperatures, on-chip temperatures, and system voltage/power/current
|
consumption.
|
|
Datasheets:
|
https://www.ti.com/lit/gpn/tmp513
|
https://www.ti.com/lit/gpn/tmp512
|
|
|
properties:
|
compatible:
|
enum:
|
- ti,tmp512
|
- ti,tmp513
|
|
reg:
|
maxItems: 1
|
|
shunt-resistor-micro-ohms:
|
description: |
|
If 0, the calibration process will be skiped and the current and power
|
measurement engine will not work. Temperature and voltage measurement
|
will continue to work. The shunt value also need to respect:
|
rshunt <= pga-gain * 40 * 1000 * 1000.
|
If not, it's not possible to compute a valid calibration value.
|
default: 1000
|
|
ti,pga-gain:
|
description: |
|
The gain value for the PGA function. This is 8, 4, 2 or 1.
|
The PGA gain affect the shunt voltage range.
|
The range will be equal to: pga-gain * 40mV
|
$ref: /schemas/types.yaml#/definitions/uint32
|
enum: [1, 2, 4, 8]
|
default: 8
|
|
ti,bus-range-microvolt:
|
description: |
|
This is the operating range of the bus voltage in microvolt
|
$ref: /schemas/types.yaml#/definitions/uint32
|
enum: [16000000, 32000000]
|
default: 32000000
|
|
ti,nfactor:
|
description: |
|
Array of three(TMP513) or two(TMP512) n-Factor value for each remote
|
temperature channel.
|
See datasheet Table 11 for n-Factor range list and value interpretation.
|
$ref: /schemas/types.yaml#definitions/uint32-array
|
minItems: 2
|
maxItems: 3
|
items:
|
default: 0x00
|
minimum: 0x00
|
maximum: 0xFF
|
|
required:
|
- compatible
|
- reg
|
|
additionalProperties: false
|
|
examples:
|
- |
|
i2c {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
tmp513@5c {
|
compatible = "ti,tmp513";
|
reg = <0x5C>;
|
shunt-resistor-micro-ohms = <330000>;
|
ti,bus-range-microvolt = <32000000>;
|
ti,pga-gain = <8>;
|
ti,nfactor = <0x1 0xF3 0x00>;
|
};
|
};
|
