Himax HX8357D display panels
|
|
This binding is for display panels using a Himax HX8357D controller in SPI
|
mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
|
|
Required properties:
|
- compatible: "adafruit,yx350hv15", "himax,hx8357d"
|
- dc-gpios: D/C pin
|
- reg: address of the panel on the SPI bus
|
|
The node for this driver must be a child node of a SPI controller, hence
|
all mandatory properties described in ../spi/spi-bus.txt must be specified.
|
|
Optional properties:
|
- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
|
- backlight: phandle of the backlight device attached to the panel
|
|
Example:
|
display@0{
|
compatible = "adafruit,yx350hv15", "himax,hx8357d";
|
reg = <0>;
|
spi-max-frequency = <32000000>;
|
dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
|
rotation = <90>;
|
backlight = <&backlight>;
|
};
|
