Buildroot board support for Telit EVK-PRO3 with Telit GE863-PRO3
|
|
Official site:
|
http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=10
|
|
Build images:
|
make telit_evk_pro3_defconfig
|
make
|
|
images built:
|
- output/images/barebox.bin
|
- output/images/zImage
|
- output/images/rootfs.ubi
|
|
|
Flash built images:
|
The first time you need to bootstrap from Telit Official Release 221.07.1007,
|
at the U-Boot prompt type:
|
U-Boot> loadb
|
send buildroot/output/images/barebox.bin
|
U-Boot> go 0x20200000
|
|
flash updated images using barebox through tftp:
|
barebox:/ erase dev/self0; cp /mnt/tftp/barebox.bin /dev/self0
|
barebox:/ erase /dev/nand0.kernel.bb; cp /mnt/tftp/zImage /dev/nand0.kernel.bb
|
barebox:/ erase /dev/nand0.rootfs.bb; cp /mnt/tftp/rootfs.ubi /dev/nand0.rootfs.bb
|
barebox:/ erase dev/env0
|
barebox:/ reset
|
