**************************
|
Freescale i.MX23 EVK board
|
**************************
|
|
This file documents the Buildroot support for the Freescale i.MX23 EVK board.
|
|
Build
|
=====
|
|
First, configure Buildroot for your i.MX23 EVK board:
|
|
make imx23evk_defconfig
|
|
Build all components:
|
|
make
|
|
You will find in output/images/ directory the following files:
|
- imx23-evk.dtb
|
- rootfs.tar
|
- u-boot.sd
|
- zImage
|
|
Create a bootable SD card
|
=========================
|
|
To determine the device associated to the SD card have a look in the
|
/proc/partitions file:
|
|
cat /proc/partitions
|
|
Then, run the following command:
|
|
*** WARNING! The command will destroy all the card content. Use with care! ***
|
|
sudo dd if=output/images/sdcard.img of=/dev/<your-microsd-device>
|
|
Boot the i.MX23 EVK board
|
=========================
|
|
- Put the Boot Mode Select jumper as 1 0 0 1 so that it can boot
|
from the SD card
|
- Insert the SD card in the SD Card slot of the board;
|
- Connect an RS232 UART cable to the Debug UART Port and connect using a
|
terminal emulator at 115200 bps, 8n1;
|
- power on the board.
|
|
Enjoy!
|
