# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
%YAML 1.2
|
---
|
$id: http://devicetree.org/schemas/pinctrl/cirrus,madera.yaml#
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
title: Cirrus Logic Madera class audio CODECs pinctrl driver
|
|
maintainers:
|
- patches@opensource.cirrus.com
|
|
description: |
|
The Cirrus Logic Madera codecs provide a number of GPIO functions for
|
interfacing to external hardware and to provide logic outputs to other devices.
|
Certain groups of GPIO pins also have an alternate function, normally as an
|
audio interface.
|
|
The set of available GPIOs, functions and alternate function groups differs
|
between CODECs so refer to the datasheet for the CODEC for further information
|
on what is supported on that device.
|
|
The properties for this driver exist within the parent MFD driver node.
|
|
See also the core bindings for the parent MFD driver:
|
|
Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
|
|
And the generic pinmix bindings:
|
|
Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
|
properties:
|
pinctrl-0:
|
description:
|
A phandle to the node containing the subnodes containing default
|
configurations.
|
|
pinctrl-names:
|
description:
|
A pinctrl state named "default" must be defined.
|
const: default
|
|
pin-settings:
|
description:
|
One subnode is required to contain the default settings. It
|
contains an arbitrary number of configuration subnodes, one for
|
each group or pin configuration you want to apply as a default.
|
type: object
|
patternProperties:
|
'-pins$':
|
type: object
|
allOf:
|
- $ref: "pincfg-node.yaml#"
|
- $ref: "pinmux-node.yaml#"
|
properties:
|
groups:
|
description:
|
Name of one pin group to configure.
|
enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1,
|
pdmspk2, dmic4, dmic5, dmic6, gpio1, gpio2, gpio3,
|
gpio4, gpio5, gpio6, gpio7, gpio7, gpio8, gpio9,
|
gpio10, gpio11, gpio12, gpio13, gpio14, gpio15,
|
gpio16, gpio17, gpio17, gpio18, gpio19, gpio20,
|
gpio21, gpio22, gpio23, gpio24, gpio25, gpio26,
|
gpio27, gpio27, gpio28, gpio29, gpio30, gpio31,
|
gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
|
gpio37, gpio38, gpio39 ]
|
|
function:
|
description:
|
Name of function to assign to this group.
|
enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3,
|
pdmspk1, pdmspk2, dmic3, dmic4, dmic5,
|
dmic6, io, dsp-gpio, irq1, irq2, fll1-clk,
|
fll1-lock, fll2-clk, fll2-lock, fll3-clk,
|
fll3-lock, fllao-clk, fllao-lock, opclk,
|
opclk-async, pwm1, pwm2, spdif, asrc1-in1-lock,
|
asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock,
|
spkl-short-circuit, spkr-short-circuit,
|
spk-shutdown, spk-overheat-shutdown,
|
spk-overheat-warn, timer1-sts, timer2-sts,
|
timer3-sts, timer4-sts, timer5-sts, timer6-sts,
|
timer7-sts, timer8-sts, log1-fifo-ne,
|
log2-fifo-ne, log3-fifo-ne, log4-fifo-ne,
|
log5-fifo-ne, log6-fifo-ne, log7-fifo-ne,
|
log8-fifo-ne ]
|
|
bias-disable: true
|
|
bias-bus-hold: true
|
|
bias-pull-up: true
|
|
bias-pull-down: true
|
|
drive-push-pull: true
|
|
drive-open-drain: true
|
|
drive-strength:
|
enum: [ 4, 8 ]
|
|
input-schmitt-enable: true
|
|
input-schmitt-disable: true
|
|
input-debounce: true
|
|
output-low: true
|
|
output-high: true
|
|
additionalProperties: false
|
|
required:
|
- groups
|
|
additionalProperties: false
|
|
required:
|
- pinctrl-0
|
- pinctrl-names
|
|
additionalProperties: true
|
