TI LP873X PMIC MFD driver
|
|
Required properties:
|
- compatible: "ti,lp8732", "ti,lp8733"
|
- reg: I2C slave address.
|
- gpio-controller: Marks the device node as a GPIO Controller.
|
- #gpio-cells: Should be two. The first cell is the pin number and
|
the second cell is used to specify flags.
|
See ../gpio/gpio.txt for more information.
|
- xxx-in-supply: Phandle to parent supply node of each regulator
|
populated under regulators node. xxx can be
|
buck0, buck1, ldo0 or ldo1.
|
- regulators: List of child nodes that specify the regulator
|
initialization data.
|
Example:
|
|
pmic: lp8733@60 {
|
compatible = "ti,lp8733";
|
reg = <0x60>;
|
gpio-controller;
|
#gpio-cells = <2>;
|
|
buck0-in-supply = <&vsys_3v3>;
|
buck1-in-supply = <&vsys_3v3>;
|
ldo0-in-supply = <&vsys_3v3>;
|
ldo1-in-supply = <&vsys_3v3>;
|
|
regulators {
|
lp8733_buck0: buck0 {
|
regulator-name = "lp8733-buck0";
|
regulator-min-microvolt = <800000>;
|
regulator-max-microvolt = <1400000>;
|
regulator-min-microamp = <1500000>;
|
regulator-max-microamp = <4000000>;
|
regulator-ramp-delay = <10000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
lp8733_buck1: buck1 {
|
regulator-name = "lp8733-buck1";
|
regulator-min-microvolt = <800000>;
|
regulator-max-microvolt = <1400000>;
|
regulator-min-microamp = <1500000>;
|
regulator-max-microamp = <4000000>;
|
regulator-ramp-delay = <10000>;
|
regulator-boot-on;
|
regulator-always-on;
|
};
|
|
lp8733_ldo0: ldo0 {
|
regulator-name = "lp8733-ldo0";
|
regulator-min-microvolt = <800000>;
|
regulator-max-microvolt = <3000000>;
|
regulator-boot-on;
|
regulator-always-on;
|
};
|
|
lp8733_ldo1: ldo1 {
|
regulator-name = "lp8733-ldo1";
|
regulator-min-microvolt = <800000>;
|
regulator-max-microvolt = <3000000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
};
|
};
|
