1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
| /* SPDX-License-Identifier: GPL-2.0 */
| #ifndef HALMAC_POWER_SEQUENCE_8822B
| #define HALMAC_POWER_SEQUENCE_8822B
|
| #include "../../halmac_pwr_seq_cmd.h"
|
| /*
| * Check document WM-20151103-v02-JackieLau-RTL8822B_Power_Architecture.vsd
| * There are 6 HW Power States:
| * 0: POFF--Power Off
| * 1: PDN--Power Down
| * 2: CARDEMU--Card Emulation
| * 3: ACT--Active Mode
| * 4: LPS--Low Power State
| * 5: SUS--Suspend
| *
| * The transition from different states are defined below
| * TRANS_CARDEMU_TO_ACT
| * TRANS_ACT_TO_CARDEMU
| * TRANS_CARDEMU_TO_SUS
| * TRANS_SUS_TO_CARDEMU
| * TRANS_CARDEMU_TO_PDN
| * TRANS_ACT_TO_LPS
| * TRANS_LPS_TO_ACT
| *
| * TRANS_END
| */
|
| #define HALMAC_8822B_TRANS_CARDEMU_TO_ACT_STEPS 25
| #define HALMAC_8822B_TRANS_ACT_TO_CARDEMU_STEPS 15
| #define HALMAC_8822B_TRANS_CARDEMU_TO_SUS_STEPS 15
| #define HALMAC_8822B_TRANS_SUS_TO_CARDEMU_STEPS 15
| #define HALMAC_8822B_TRANS_CARDEMU_TO_PDN_STEPS 15
| #define HALMAC_8822B_TRANS_PDN_TO_CARDEMU_STEPS 15
| #define HALMAC_8822B_TRANS_ACT_TO_LPS_STEPS 25
| #define HALMAC_8822B_TRANS_ACT_TO_DEEP_LPS_STEPS 25
| #define HALMAC_8822B_TRANS_LPS_TO_ACT_STEPS 20
| #define HALMAC_8822B_TRANS_END_STEPS 1
|
|
| #define HALMAC_RTL8822B_TRANS_CARDEMU_TO_ACT \
| /* format */ \
| /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, // comments here*/ \
| { 0x0020, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK | HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), BIT(0) }, /*0x20[0] = 1b'1 enable LDOA12 MACRO block for all interface*/ \
| { 0x0067, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK | HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(4), 0 }, /*0x67[0] = 0 to disable BT_GPS_SEL pins*/ \
| { 0x0001, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK | HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_DELAY, 1, HALMAC_PWRSEQ_DELAY_MS }, /*Delay 1ms*/ \
| { 0x0000, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK | HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(5), 0 }, /*0x00[5] = 1b'0 release analog Ips to digital ,1:isolation*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, (BIT(4) | BIT(3) | BIT(2)), 0 }, /* disable SW LPS 0x04[10]=0 and WLSUS_EN 0x04[12:11]=0*/ \
| { 0x0075, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_PCI_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), BIT(0) }, /* Disable USB suspend */ \
| { 0x0004, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_PCI_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3), BIT(3) }, /* enabled usb resume */ \
| { 0x0004, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_PCI_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3), 0 }, /* disable usb resume */ \
| { 0x0006, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, BIT(1), BIT(1) }, /* wait till 0x04[17] = 1 power ready*/ \
| { 0x0075, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_PCI_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), 0 }, /* Enable USB suspend */ \
| { 0xFF1A, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0 }, /*0xFF1A = 0 to release resume signals*/ \
| { 0x0006, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), BIT(0) }, /* release WLON reset 0x04[16]=1*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(7), 0 }, /* disable HWPDN 0x04[15]=0*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, (BIT(4) | BIT(3)), 0 }, /* disable WL suspend*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), BIT(0) }, /* polling until return 0*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, BIT(0), 0 }, /**/ \
| { 0x0020, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3), BIT(3) }, /*Enable XTAL_CLK*/ \
| { 0x0067, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(5), BIT(5) }, /*0x67[5]=1 , BIT_PAPE_WLBT_SEL*/ \
|
| #define HALMAC_RTL8822B_TRANS_ACT_TO_CARDEMU \
| /* format */ \
| /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, // comments here*/ \
| { 0x001F, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0 }, /*0x1F[7:0] = 0 turn off RF*/ \
| { 0x00EF, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0 }, /*0xEF[7:0] = 0 turn off RF*/ \
| { 0xFF1A, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x30 }, /*0xFF1A = 0x30 to block resume signals*/ \
| { 0x0049, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1), 0 }, /*Enable rising edge triggering interrupt*/ \
| { 0x0006, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), BIT(0) }, /* release WLON reset 0x04[16]=1*/ \
| { 0x0002, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1), 0 }, /* Whole BB is reset */ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1), BIT(1) }, /*0x04[9] = 1 turn off MAC by HW state machine*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, BIT(1), 0 }, /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
| { 0x0020, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3), 0 }, /* XTAL_CLK gated*/ \
| { 0x0000, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK | HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(5), BIT(5) }, /*0x00[5] = 1b'1 analog Ips to digital ,1:isolation*/ \
|
| #define HALMAC_RTL8822B_TRANS_CARDEMU_TO_SUS \
| /* format */ \
| /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, // comments here*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_PCI_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(4) | BIT(3), (BIT(4) | BIT(3)) }, /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK | HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) }, /*0x04[12:11] = 2b'01 enable WL suspend*/ \
| { 0x0007, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x20 }, /*0x07[7:0] = 0x20 SDIO SOP option to disable BG/MB/ACK/SWR*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_PCI_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4) }, /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \
| { 0x0086, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_WRITE, BIT(0), BIT(0) }, /*Set SDIO suspend local register*/ \
| { 0x0086, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_POLLING, BIT(1), 0 }, /*wait power state to suspend*/
|
| #define HALMAC_RTL8822B_TRANS_SUS_TO_CARDEMU \
| /* format */ \
| /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, // comments here*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3) | BIT(7), 0 }, /*clear suspend enable and power down enable*/ \
| { 0x0086, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_WRITE, BIT(0), 0 }, /*Set SDIO suspend local register*/ \
| { 0x0086, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_POLLING, BIT(1), BIT(1) }, /*wait power state to suspend*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3) | BIT(4), 0 }, /*0x04[12:11] = 2b'01enable WL suspend*/
|
| #define HALMAC_RTL8822B_TRANS_CARDEMU_TO_CARDDIS \
| /* format */ \
| /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, // comments here*/ \
| { 0x0007, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK | HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x20 }, /*0x07=0x20 , SOP option to disable BG/MB*/ \
| { 0x0067, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(5), 0 }, /*0x67[5]=0 , BIT_PAPE_WLBT_SEL*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK | HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) }, /*0x04[12:11] = 2b'01 enable WL suspend*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_PCI_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(2), BIT(2) }, /*0x04[10] = 1, enable SW LPS*/ \
| { 0x004A, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), 0 }, /*0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/ \
| { 0x0086, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_WRITE, BIT(0), BIT(0) }, /*Set SDIO suspend local register*/ \
| { 0x0086, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_POLLING, BIT(1), 0 }, /*wait power state to suspend*/ \
| { 0x0090, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK | HALMAC_PWR_INTF_PCI_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1), 0 }, /*0x90[1]=0 , disable 32k clock*/ \
| { 0x0044, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_WRITE, 0xFF, 0 }, /*0x90[1]=0 , disable 32k clock by indirect access*/ \
| { 0x0040, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_WRITE, 0xFF, 0x90 }, /*0x90[1]=0 , disable 32k clock by indirect access*/ \
| { 0x0041, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_WRITE, 0xFF, 0x00 }, /*0x90[1]=0 , disable 32k clock by indirect access*/ \
| { 0x0042, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_WRITE, 0xFF, 0x04 }, /*0x90[1]=0 , disable 32k clock by indirect access*/
|
| #define HALMAC_RTL8822B_TRANS_CARDDIS_TO_CARDEMU \
| /* format */ \
| /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, // comments here*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3) | BIT(7), 0 }, /*clear suspend enable and power down enable*/ \
| { 0x0086, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_WRITE, BIT(0), 0 }, /*Set SDIO suspend local register*/ \
| { 0x0086, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_POLLING, BIT(1), BIT(1) }, /*wait power state to suspend*/ \
| { 0x004A, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), 0 }, /*0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3) | BIT(4), 0 }, /*0x04[12:11] = 2b'01enable WL suspend*/ \
| { 0x0301, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_PCI_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0 }, /*PCIe DMA start*/
|
|
| #define HALMAC_RTL8822B_TRANS_CARDEMU_TO_PDN \
| /* format */ \
| /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, // comments here*/ \
| { 0x0007, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK | HALMAC_PWR_INTF_USB_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x20 }, /*0x07[7:0] = 0x20 SOP option to disable BG/MB/ACK/SWR*/ \
| { 0x0006, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), 0 }, /* 0x04[16] = 0*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(7), BIT(7) }, /* 0x04[15] = 1*/
|
| #define HALMAC_RTL8822B_TRANS_PDN_TO_CARDEMU \
| /* format */ \
| /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, // comments here*/ \
| { 0x0005, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(7), 0 },/* 0x04[15] = 0*/
|
| #define HALMAC_RTL8822B_TRANS_ACT_TO_LPS \
| /* format */ \
| /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, // comments here*/ \
| { 0x0101, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(2), BIT(2) }, /*Enable 32k calibration and thermal meter*/ \
| { 0x0199, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3), BIT(3) }, /*Register write data of 32K calibration*/ \
| { 0x019B, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(7), BIT(7) }, /*Enable 32k calibration reg write*/ \
| { 0x1138, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0) | BIT(1), BIT(0) | BIT(1) }, /*set RPWM IMR*/ \
| { 0x0194, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), BIT(0) }, /* enable 32K CLK*/ \
| { 0x0093, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x42 }, /* LPS Option MAC OFF enable*/ \
| { 0x0092, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x20 }, /* LPS Option Enable memory to deep sleep mode*/ \
| { 0x0090, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1), BIT(1) }, /* enable reg use 32K CLK*/ \
| { 0x0301, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_PCI_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0xFF }, /*PCIe DMA stop*/ \
| { 0x0522, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0xFF }, /*Tx Pause*/ \
| { 0x05F8, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, 0xFF, 0 }, /*Should be zero if no packet is transmitting*/ \
| { 0x05F9, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, 0xFF, 0 }, /*Should be zero if no packet is transmitting*/ \
| { 0x05FA, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, 0xFF, 0 }, /*Should be zero if no packet is transmitting*/ \
| { 0x05FB, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, 0xFF, 0 }, /*Should be zero if no packet is transmitting*/ \
| { 0x0002, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), 0 }, /*CCK and OFDM are disabled,and clock are gated*/ \
| { 0x0002, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_DELAY, 0, HALMAC_PWRSEQ_DELAY_US }, /*Delay 1us*/ \
| { 0x0002, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1), 0 }, /*Whole BB is reset*/ \
| { 0x0100, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x3F }, /*Reset MAC TRX*/ \
| { 0x0101, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1), 0 }, /*check if removed later*/ \
| { 0x0553, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(5), BIT(5) }, /*Respond TxOK to scheduler*/ \
| { 0x0008, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(4), BIT(4) }, /* switch TSF clock to 32K*/ \
| { 0x0109, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, BIT(7), BIT(7) }, /*Polling 0x109[7]=0 TSF in 40M*/ \
| { 0x0090, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), BIT(0) }, /* enable WL_LPS_EN*/
|
| #define HALMAC_RTL8822B_TRANS_ACT_TO_DEEP_LPS \
| /* format */ \
| /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, // comments here*/ \
| { 0x0101, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(2), BIT(2) }, /*Enable 32k calibration and thermal meter*/ \
| { 0x0199, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(3), BIT(3) }, /*Register write data of 32K calibration*/ \
| { 0x019B, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(7), BIT(7) }, /*Enable 32k calibration reg write*/ \
| { 0x1138, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0) | BIT(1), BIT(0) | BIT(1) }, /*set RPWM IMR*/ \
| { 0x0194, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), BIT(0) }, /* enable 32K CLK*/ \
| { 0x0093, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x40 }, /* LPS Option MAC OFF enable*/ \
| { 0x0092, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x20 }, /* LPS Option Enable memory to deep sleep mode*/ \
| { 0x0090, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1), BIT(1) }, /* enable reg use 32K CLK*/ \
| { 0x0301, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_PCI_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0xFF }, /*PCIe DMA stop*/ \
| { 0x0522, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0xFF }, /*Tx Pause*/ \
| { 0x05F8, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, 0xFF, 0 }, /*Should be zero if no packet is transmitting*/ \
| { 0x05F9, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, 0xFF, 0 }, /*Should be zero if no packet is transmitting*/ \
| { 0x05FA, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, 0xFF, 0 }, /*Should be zero if no packet is transmitting*/ \
| { 0x05FB, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, 0xFF, 0 }, /*Should be zero if no packet is transmitting*/ \
| { 0x0002, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), 0 }, /*CCK and OFDM are disabled,and clock are gated*/ \
| { 0x0002, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_DELAY, 0, HALMAC_PWRSEQ_DELAY_US }, /*Delay 1us*/ \
| { 0x0002, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1), 0 }, /*Whole BB is reset*/ \
| { 0x0100, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x3F }, /*Reset MAC TRX*/ \
| { 0x0101, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1), 0 }, /*check if removed later*/ \
| { 0x0553, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(5), BIT(5) }, /*Respond TxOK to scheduler*/ \
| { 0x0008, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(4), BIT(4) }, /* switch TSF clock to 32K*/ \
| { 0x0109, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, BIT(7), BIT(7) }, /*Polling 0x109[7]=1 TSF in 32K*/ \
| { 0x0090, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(0), BIT(0) }, /* enable WL_LPS_EN*/
|
| #define HALMAC_RTL8822B_TRANS_LPS_TO_ACT \
| /* format */ \
| /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, // comments here*/ \
| { 0x0080, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_WRITE, BIT(7), BIT(7) }, /*SDIO RPWM*/ \
| { 0x0002, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_DELAY, 0, HALMAC_PWRSEQ_DELAY_MS }, /*Delay*/ \
| { 0x0080, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_SDIO_MSK, HALMAC_PWR_BASEADDR_SDIO, HALMAC_PWR_CMD_WRITE, BIT(7), 0 }, /*SDIO RPWM*/ \
| { 0xFE58, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_USB_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x84 }, /*USB RPWM*/ \
| { 0x0361, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_PCI_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x84 }, /*PCIe RPWM*/ \
| { 0x0002, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_DELAY, 0, HALMAC_PWRSEQ_DELAY_MS }, /*Delay*/ \
| { 0x0008, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(4), 0 }, /*. 0x08[4] = 0 switch TSF to 40M*/ \
| { 0x0109, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_POLLING, BIT(7), 0 }, /*Polling 0x109[7]=0 TSF in 40M*/ \
| { 0x0101, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1), BIT(1) }, /*. 0x101[1] = 1*/ \
| { 0x0100, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0xFF }, /*. 0x100[7:0] = 0xFF enable WMAC TRX*/ \
| { 0x0002, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0) }, /*. 0x02[1:0] = 2b'11 enable BB macro*/ \
| { 0x0522, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0 }, /*. 0x522 = 0*/ \
| { 0x113C, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0x03 }, /*clear RPWM INT*/ \
| { 0x0124, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0xFF }, /*clear FW INT*/ \
| { 0x0125, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0xFF }, /*clear FW INT*/ \
| { 0x0126, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0xFF }, /*clear FW INT*/ \
| { 0x0127, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, 0xFF, 0xFF }, /*clear FW INT*/ \
| { 0x0090, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(1), 0 }, /* disable reg use 32K CLK*/ \
| { 0x0101, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, HALMAC_PWR_BASEADDR_MAC, HALMAC_PWR_CMD_WRITE, BIT(2), 0 }, /*disable 32k calibration and thermal meter*/
|
| #define HALMAC_RTL8822B_TRANS_END \
| /* format */ \
| /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, // comments here*/ \
| { 0xFFFF, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_ALL_MSK, HALMAC_PWR_INTF_ALL_MSK, 0, HALMAC_PWR_CMD_END, 0, 0 }, /* */
|
|
| extern HALMAC_WLAN_PWR_CFG halmac_8822b_power_on_flow[HALMAC_8822B_TRANS_CARDEMU_TO_ACT_STEPS + HALMAC_8822B_TRANS_END_STEPS];
| extern HALMAC_WLAN_PWR_CFG halmac_8822b_radio_off_flow[HALMAC_8822B_TRANS_ACT_TO_CARDEMU_STEPS + HALMAC_8822B_TRANS_END_STEPS];
| extern HALMAC_WLAN_PWR_CFG halmac_8822b_card_disable_flow[HALMAC_8822B_TRANS_ACT_TO_CARDEMU_STEPS + HALMAC_8822B_TRANS_CARDEMU_TO_PDN_STEPS + HALMAC_8822B_TRANS_END_STEPS];
| extern HALMAC_WLAN_PWR_CFG halmac_8822b_card_enable_flow[HALMAC_8822B_TRANS_ACT_TO_CARDEMU_STEPS + HALMAC_8822B_TRANS_CARDEMU_TO_PDN_STEPS + HALMAC_8822B_TRANS_END_STEPS];
| extern HALMAC_WLAN_PWR_CFG halmac_8822b_suspend_flow[HALMAC_8822B_TRANS_ACT_TO_CARDEMU_STEPS + HALMAC_8822B_TRANS_CARDEMU_TO_SUS_STEPS + HALMAC_8822B_TRANS_END_STEPS];
| extern HALMAC_WLAN_PWR_CFG halmac_8822b_resume_flow[HALMAC_8822B_TRANS_ACT_TO_CARDEMU_STEPS + HALMAC_8822B_TRANS_CARDEMU_TO_SUS_STEPS + HALMAC_8822B_TRANS_END_STEPS];
| extern HALMAC_WLAN_PWR_CFG halmac_8822b_hwpdn_flow[HALMAC_8822B_TRANS_ACT_TO_CARDEMU_STEPS + HALMAC_8822B_TRANS_CARDEMU_TO_PDN_STEPS + HALMAC_8822B_TRANS_END_STEPS];
| extern HALMAC_WLAN_PWR_CFG halmac_8822b_enter_lps_flow[HALMAC_8822B_TRANS_ACT_TO_LPS_STEPS + HALMAC_8822B_TRANS_END_STEPS];
| extern HALMAC_WLAN_PWR_CFG halmac_8822b_enter_deep_lps_flow[HALMAC_8822B_TRANS_ACT_TO_DEEP_LPS_STEPS + HALMAC_8822B_TRANS_END_STEPS];
| extern HALMAC_WLAN_PWR_CFG halmac_8822b_leave_lps_flow[HALMAC_8822B_TRANS_LPS_TO_ACT_STEPS + HALMAC_8822B_TRANS_END_STEPS];
|
| #endif
|
|
