* Hisilicon K3 DMA controller
|
|
See dma.txt first
|
|
Required properties:
|
- compatible: Should be "hisilicon,k3-dma-1.0"
|
- reg: Should contain DMA registers location and length.
|
- interrupts: Should contain one interrupt shared by all channel
|
- #dma-cells: see dma.txt, should be 1, para number
|
- dma-channels: physical channels supported
|
- dma-requests: virtual channels supported, each virtual channel
|
have specific request line
|
- clocks: clock required
|
|
Example:
|
|
Controller:
|
dma0: dma@fcd02000 {
|
compatible = "hisilicon,k3-dma-1.0";
|
reg = <0xfcd02000 0x1000>;
|
#dma-cells = <1>;
|
dma-channels = <16>;
|
dma-requests = <27>;
|
interrupts = <0 12 4>;
|
clocks = <&pclk>;
|
};
|
|
Client:
|
Use specific request line passing from dmax
|
For example, i2c0 read channel request line is 18, while write channel use 19
|
|
i2c0: i2c@fcb08000 {
|
compatible = "snps,designware-i2c";
|
dmas = <&dma0 18 /* read channel */
|
&dma0 19>; /* write channel */
|
dma-names = "rx", "tx";
|
};
|
|
i2c1: i2c@fcb09000 {
|
compatible = "snps,designware-i2c";
|
dmas = <&dma0 20 /* read channel */
|
&dma0 21>; /* write channel */
|
dma-names = "rx", "tx";
|
};
|
