root@ZhuoTK:/# dmesg
|
[ 15.840000] qmi_wwan_q 1-1.3:1.4: cdc-wdm0: USB WDM device
|
[ 15.860000] qmi_wwan_q 1-1.3:1.4: Quectel Android work on RawIP mode
|
[ 15.860000] qmi_wwan_q 1-1.3:1.4: rx_urb_size = 1520
|
[ 15.870000] qmi_wwan_q 1-1.3:1.4 wwan0: register 'qmi_wwan_q' at usb-101c0000.ehci-1.3, WWAN/QMI device, da:0b:ce:b2:db:21
|
|
root@ZhuoTK:/# quectel-CM -s cment &
|
[04-13_03:20:20:456] Quectel_QConnectManager_Linux_V1.6.0.25
|
[04-13_03:20:20:459] Find /sys/bus/usb/devices/1-1.3 idVendor=0x2c7c idProduct=0x125, bus=0x001, dev=0x003
|
[04-13_03:20:20:460] Auto find qmichannel = /dev/cdc-wdm0
|
[04-13_03:20:20:460] Auto find usbnet_adapter = wwan0
|
[04-13_03:20:20:461] netcard driver = qmi_wwan_q, driver version = V1.2.0.23
|
[04-13_03:20:20:461] Modem works in QMI mode
|
[04-13_03:20:20:469] cdc_wdm_fd = 7
|
[04-13_03:20:20:547] Get clientWDS = 4
|
[04-13_03:20:20:579] Get clientDMS = 1
|
[04-13_03:20:20:611] Get clientNAS = 4
|
[04-13_03:20:20:643] Get clientUIM = 1
|
[04-13_03:20:20:675] Get clientWDA = 1
|
[04-13_03:20:20:707] requestBaseBandVersion EC25EFAR06A11M4G
|
[04-13_03:20:20:836] requestGetSIMStatus SIMStatus: SIM_READY
|
[04-13_03:20:20:836] requestSetProfile[1] cment///0
|
[04-13_03:20:20:899] requestGetProfile[1] cment///0
|
[04-13_03:20:20:931] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: LTE
|
[04-13_03:20:20:963] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
|
[04-13_03:20:20:963] ifconfig wwan0 0.0.0.0
|
[04-13_03:20:20:976] ifconfig wwan0 down
|
[04-13_03:20:21:186] requestSetupDataCall WdsConnectionIPv4Handle: 0x8723e780
|
[04-13_03:20:21:316] ifconfig wwan0 up
|
[04-13_03:20:21:329] you are use OpenWrt?
|
[04-13_03:20:21:330] should not calling udhcpc manually?
|
[04-13_03:20:21:330] should modify /etc/config/network as below?
|
[04-13_03:20:21:330] config interface wan
|
[04-13_03:20:21:330] option ifname wwan0
|
[04-13_03:20:21:330] option proto dhcp
|
[04-13_03:20:21:330] should use "/sbin/ifstaus wan" to check wwan0 's status?
|
[04-13_03:20:21:331] busybox udhcpc -f -n -q -t 5 -i wwan0
|
[04-13_03:20:21:341] udhcpc (v1.23.2) started
|
[04-13_03:20:21:353] Sending discover...
|
[04-13_03:20:21:362] Sending select for 10.90.1.113...
|
[04-13_03:20:21:365] Lease of 10.90.1.113 obtained, lease time 7200
|
[04-13_03:20:21:370] udhcpc: ifconfig wwan0 10.90.1.113 netmask 255.255.255.252 broadcast +
|
[04-13_03:20:21:380] udhcpc: setting default routers: 10.90.1.114
|
|
root@ZhuoTK:/# ifconfig wwan0
|
wwan0 Link encap:Ethernet HWaddr 00:CA:01:91:97:BA
|
inet addr:10.90.1.113 Mask:255.255.255.252
|
inet6 addr: fe80::2ca:1ff:fe91:97ba/64 Scope:Link
|
UP RUNNING NOARP MTU:1500 Metric:1
|
RX packets:38 errors:0 dropped:0 overruns:0 frame:0
|
TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
|
collisions:0 txqueuelen:1000
|
RX bytes:5244 (5.1 KiB) TX bytes:6964 (6.8 KiB)
|
|
root@ZhuoTK:/# ip ro show
|
default via 10.90.1.114 dev wwan0
|
10.90.1.112/30 dev wwan0 proto kernel scope link src 10.90.1.113
|
192.168.1.0/24 dev br-lan proto kernel scope link src 192.168.1.251
|
|
root@ZhuoTK:/# killall quectel-CM
|
[04-13_03:20:46:130] requestDeactivateDefaultPDP WdsConnectionIPv4Handle
|
[04-13_03:20:46:406] ifconfig wwan0 0.0.0.0
|
[04-13_03:20:46:418] ifconfig wwan0 down
|
[04-13_03:20:46:600] QmiWwanThread exit
|
[04-13_03:20:46:600] qmi_main exit
|
