root@ZhuoTK:/# insmod GobiNet.ko qmap_mode=1
|
[ 41.540000] GobiNet: Quectel_Linux&Android_GobiNet_Driver_V1.6.2.13
|
[ 41.550000] GobiNet 1-1.3:1.4 usb0: register 'GobiNet' at usb-101c0000.ehci-1.3, GobiNet Ethernet Device, 02:50:f4:00:00:00
|
[ 41.570000] creating qcqmi0
|
[ 41.570000] usbcore: registered new interface driver GobiNet
|
[ 42.700000] GobiNet::QMIWDASetDataFormat qmap settings qmap_version=5, rx_size=4096, tx_size=4096
|
[ 42.710000] GobiNet::QMIWDASetDataFormat qmap settings ul_data_aggregation_max_size=4096, ul_data_aggregation_max_datagrams=16
|
|
root@ZhuoTK:/# brctl addbr br0
|
root@ZhuoTK:/# brctl addif br0 eth0.1
|
root@ZhuoTK:/# brctl addif br0 usb0
|
root@ZhuoTK:/# brctl show
|
bridge name bridge id STP enabled interfaces
|
br0 8000.00ca019197b9 no eth0.1
|
usb0
|
|
root@ZhuoTK:/# quectel-CM -s cmnet -b &
|
# [04-13_05:12:29:338] Quectel_QConnectManager_Linux_V1.6.0.25
|
[04-13_05:12:29:340] Find /sys/bus/usb/devices/1-1.3 idVendor=0x2c7c idProduct=0x125, bus=0x001, dev=0x003
|
[ 73.380000] net usb0: bridge_mode change to 0x1
|
[04-13_05:12:29:342] Auto find qmichannel = /dev/qcqmi0
|
[04-13_05:12:29:342] Auto find usbnet_adapter = usb0
|
[04-13_05:12:29:342] netcard driver = GobiNet, driver version = V1.6.2.13
|
[04-13_05:12:29:343] qmap_mode = 1, qmap_version = 5, qmap_size = 4096, muxid = 0x81, qmap_netcard = usb0
|
[04-13_05:12:29:348] Modem works in QMI mode
|
[04-13_05:12:29:382] Get clientWDS = 7
|
[04-13_05:12:29:414] Get clientDMS = 8
|
[04-13_05:12:29:447] Get clientNAS = 9
|
[04-13_05:12:29:479] Get clientUIM = 10
|
[04-13_05:12:29:512] requestBaseBandVersion EC25EFAR06A11M4G
|
[04-13_05:12:29:640] requestGetSIMStatus SIMStatus: SIM_READY
|
[04-13_05:12:29:640] requestSetProfile[1] cmnet///0
|
[04-13_05:12:29:704] requestGetProfile[1] cmnet///0
|
[04-13_05:12:29:735] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: LTE
|
[04-13_05:12:29:767] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
|
[04-13_05:12:29:768] ifconfig usb0 0.0.0.0
|
[04-13_05:12:29:792] ifconfig usb0 down
|
[04-13_05:12:29:863] requestSetupDataCall WdsConnectionIPv4Handle: 0x8724d820
|
[ 74.030000] net usb0: link_state 0x0 -> 0x1
|
[04-13_05:12:29:996] ifconfig usb0 up
|
[04-13_05:12:30:022] echo '0xa16b769' > /sys/class/net/usb0/bridge_ipv4
|
|
root@ZhuoTK:/# ifconfig br0 up
|
[ 82.210000] br0: port 2(usb0) entered forwarding state
|
[ 82.210000] br0: port 2(usb0) entered forwarding state
|
[ 82.220000] br0: port 1(eth0.1) entered forwarding state
|
[ 82.220000] br0: port 1(eth0.1) entered forwarding state
|
[ 88.830000] rt305x-esw 10110000.esw: link changed 0x01
|
[ 89.010000] usb0 PC Mac Address: 00:0e:c6:a6:6c:f1
|
[ 89.040000] usb0 PC Mac Address: 00:0e:c6:a6:6c:f1
|
[ 89.050000] usb0 PC Mac Address: 00:0e:c6:a6:6c:f1
|
[ 89.120000] usb0 sip = 10.22.183.105, tip=10.22.183.106, ipv4=10.22.183.105
|
[ 89.350000] usb0 sip = 0.0.0.0, tip=10.22.183.105, ipv4=10.22.183.105
|
[ 89.400000] usb0 sip = 10.22.183.105, tip=10.22.183.106, ipv4=10.22.183.105
|
[ 89.520000] usb0 sip = 10.22.183.105, tip=10.22.183.106, ipv4=10.22.183.105
|
[ 90.350000] usb0 sip = 0.0.0.0, tip=10.22.183.105, ipv4=10.22.183.105
|
[ 91.350000] usb0 sip = 0.0.0.0, tip=10.22.183.105, ipv4=10.22.183.105
|
[ 92.350000] usb0 sip = 10.22.183.105, tip=10.22.183.105, ipv4=10.22.183.105
|
[ 92.430000] usb0 sip = 10.22.183.105, tip=10.22.183.106, ipv4=10.22.183.105
|
[ 92.660000] usb0 sip = 10.22.183.105, tip=10.22.183.106, ipv4=10.22.183.105
|
[ 97.240000] br0: port 2(usb0) entered forwarding state
|
[ 97.240000] br0: port 1(eth0.1) entered forwarding state
|
