root@ZhuoTK:/# insmod GobiNet.ko
|
[ 80.460000] GobiNet: Quectel_Linux&Android_GobiNet_Driver_V1.6.2.13
|
[ 80.460000] usbcore: registered new interface driver GobiNet
|
[ 97.710000] usb 1-1.3: new high-speed USB device number 3 using ehci-platform
|
[ 97.930000] usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB103
|
[ 97.950000] GobiNet 1-1.3:1.4 usb0: register 'GobiNet' at usb-101c0000.ehci-1.3, GobiNet Ethernet Device, 02:50:f4:00:00:00
|
[ 97.960000] creating qcqmi0
|
|
root@ZhuoTK:/# brctl addbr br0
|
root@ZhuoTK:/# brctl addif br0 eth0.1
|
root@ZhuoTK:/# brctl addif br0 usb0
|
root@ZhuoTK:/# brctl show
|
bridge name bridge id STP enabled interfaces
|
br0 8000.00ca019197b9 no eth0.1
|
usb0
|
|
root@ZhuoTK:/# quectel-CM -s cment -b &
|
[04-13_05:13:18:213] Quectel_QConnectManager_Linux_V1.6.0.25
|
[04-13_05:13:18:216] Find /sys/bus/usb/devices/1-1.3 idVendor=0x2c7c idProduct=0x125, bus=0x001, dev=0x003
|
[ 122.270000] net usb0: bridge_mode change to 0x1
|
[04-13_05:13:18:218] Auto find qmichannel = /dev/qcqmi0
|
[04-13_05:13:18:218] Auto find usbnet_adapter = usb0
|
[04-13_05:13:18:218] netcard driver = GobiNet, driver version = V1.6.2.13
|
[04-13_05:13:18:224] Modem works in QMI mode
|
[04-13_05:13:18:251] Get clientWDS = 7
|
[04-13_05:13:18:282] Get clientDMS = 8
|
[04-13_05:13:18:316] Get clientNAS = 9
|
[04-13_05:13:18:347] Get clientUIM = 10
|
[04-13_05:13:18:379] Get clientWDA = 11
|
[04-13_05:13:18:411] requestBaseBandVersion EC25EFAR06A11M4G
|
[04-13_05:13:18:539] requestGetSIMStatus SIMStatus: SIM_READY
|
[04-13_05:13:18:540] requestSetProfile[1] cment///0
|
[04-13_05:13:18:603] requestGetProfile[1] cment///0
|
[04-13_05:13:18:637] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: LTE
|
[04-13_05:13:18:666] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
|
[04-13_05:13:18:667] ifconfig usb0 0.0.0.0
|
[04-13_05:13:18:687] ifconfig usb0 down
|
[04-13_05:13:19:083] requestSetupDataCall WdsConnectionIPv4Handle: 0x8724d220
|
[04-13_05:13:19:243] ifconfig usb0 up
|
[04-13_05:13:19:270] echo '0xa218480' > /sys/class/net/usb0/bridge_ipv4
|
|
root@ZhuoTK:/# ifconfig br0 up
|
[ 135.530000] usb0 PC Mac Address: 00:0e:c6:a6:6c:f1
|
[ 135.570000] usb0 PC Mac Address: 00:0e:c6:a6:6c:f1
|
[ 135.580000] usb0 PC Mac Address: 00:0e:c6:a6:6c:f1
|
[ 135.610000] usb0 sip = 10.33.132.128, tip=10.33.132.129, ipv4=10.33.132.128
|
[ 135.620000] usb0 sip = 10.33.132.128, tip=10.33.132.129, ipv4=10.33.132.128
|
[ 135.910000] usb0 sip = 0.0.0.0, tip=10.33.132.128, ipv4=10.33.132.128
|
[ 136.000000] usb0 sip = 10.33.132.128, tip=10.33.132.129, ipv4=10.33.132.128
|
[ 136.910000] usb0 sip = 0.0.0.0, tip=10.33.132.128, ipv4=10.33.132.128
|
[ 137.910000] usb0 sip = 0.0.0.0, tip=10.33.132.128, ipv4=10.33.132.128
|
[ 138.740000] usb0 sip = 10.33.132.128, tip=10.33.132.129, ipv4=10.33.132.128
|
[ 138.910000] usb0 sip = 10.33.132.128, tip=10.33.132.128, ipv4=10.33.132.128
|
[ 139.000000] usb0 sip = 10.33.132.128, tip=10.33.132.129, ipv4=10.33.132.128
|
[ 140.860000] usb0 sip = 10.33.132.128, tip=10.33.132.129, ipv4=10.33.132.128
|
[ 143.160000] br0: port 2(usb0) entered forwarding state
|
[ 143.160000] br0: port 1(eth0.1) entered forwarding state
|
[ 148.870000] usb0 sip = 10.33.132.128, tip=10.33.132.129, ipv4=10.33.132.128
|
[ 149.010000] usb0 sip = 10.33.132.128, tip=10.33.132.129, ipv4=10.33.132.128
|
[ 165.630000] usb0 sip = 10.33.132.128, tip=10.33.132.129, ipv4=10.33.132.128
|
