// SPDX-License-Identifier: GPL-2.0-only
|
/*
|
* Copyright (C) 2014-2017 Phytec Messtechnik GmbH
|
* Author: Wadim Egorov <w.egorov@phytec.de>
|
* Teresa Remmet <t.remmet@phytec.de>
|
*/
|
|
#include <dt-bindings/input/input.h>
|
|
/ {
|
model = "Phytec AM335x PCM-953";
|
compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
|
|
/* Power */
|
vcc3v3: fixedregulator1 {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc3v3";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-boot-on;
|
};
|
|
vcc1v8: fixedregulator2 {
|
compatible = "regulator-fixed";
|
regulator-name = "vcc1v8";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-boot-on;
|
};
|
|
/* User IO */
|
user_leds: user_leds {
|
compatible = "gpio-leds";
|
pinctrl-names = "default";
|
pinctrl-0 = <&user_leds_pins>;
|
|
user-led0 {
|
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
|
linux,default-trigger = "gpio";
|
default-state = "on";
|
};
|
|
user-led1 {
|
gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
|
linux,default-trigger = "gpio";
|
default-state = "on";
|
};
|
};
|
|
user_buttons: user_buttons {
|
compatible = "gpio-keys";
|
pinctrl-names = "default";
|
pinctrl-0 = <&user_buttons_pins>;
|
|
button@0 {
|
label = "home";
|
linux,code = <KEY_HOME>;
|
gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
|
wakeup-source;
|
};
|
|
button@1 {
|
label = "menu";
|
linux,code = <KEY_MENU>;
|
gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
|
wakeup-source;
|
};
|
|
};
|
};
|
|
&am33xx_pinmux {
|
user_buttons_pins: pinmux_user_buttons {
|
pinctrl-single,pins = <
|
AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */
|
AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */
|
>;
|
};
|
|
user_leds_pins: pinmux_user_leds {
|
pinctrl-single,pins = <
|
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */
|
>;
|
};
|
};
|
|
/* CAN */
|
&am33xx_pinmux {
|
dcan1_pins: pinmux_dcan1 {
|
pinctrl-single,pins = <
|
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */
|
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */
|
>;
|
};
|
};
|
|
&dcan1 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&dcan1_pins>;
|
status = "okay";
|
};
|
|
/* Ethernet */
|
&am33xx_pinmux {
|
ethernet1_pins: pinmux_ethernet1 {
|
pinctrl-single,pins = <
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
|
>;
|
};
|
};
|
|
&cpsw_emac1 {
|
phy-handle = <&phy1>;
|
phy-mode = "rgmii-id";
|
dual_emac_res_vlan = <2>;
|
status = "okay";
|
};
|
|
&davinci_mdio {
|
phy1: ethernet-phy@2 {
|
reg = <2>;
|
};
|
};
|
|
&mac {
|
slaves = <2>;
|
pinctrl-names = "default";
|
pinctrl-0 = <ðernet0_pins ðernet1_pins>;
|
dual_emac;
|
};
|
|
/* Misc */
|
&am33xx_pinmux {
|
pinctrl-names = "default";
|
pinctrl-0 = <&cb_gpio_pins>;
|
|
cb_gpio_pins: pinmux_cb_gpio {
|
pinctrl-single,pins = <
|
AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */
|
AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */
|
>;
|
};
|
};
|
|
/* MMC */
|
&am33xx_pinmux {
|
mmc1_pins: pinmux_mmc1_pins {
|
pinctrl-single,pins = <
|
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
|
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
|
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
|
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
|
AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
|
AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
|
AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
|
>;
|
};
|
};
|
|
&mmc1 {
|
vmmc-supply = <&vcc3v3>;
|
bus-width = <4>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&mmc1_pins>;
|
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
status = "okay";
|
};
|
|
/* UARTs */
|
&am33xx_pinmux {
|
uart0_pins: pinmux_uart0 {
|
pinctrl-single,pins = <
|
AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
|
AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
|
>;
|
};
|
|
uart1_pins: pinmux_uart1 {
|
pinctrl-single,pins = <
|
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
|
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
|
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
|
AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
|
>;
|
};
|
|
uart2_pins: pinmux_uart2 {
|
pinctrl-single,pins = <
|
AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */
|
AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */
|
>;
|
};
|
|
uart3_pins: pinmux_uart3 {
|
pinctrl-single,pins = <
|
AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */
|
AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */
|
>;
|
};
|
};
|
|
&uart0 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart0_pins>;
|
status = "okay";
|
};
|
|
&uart1 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart1_pins>;
|
};
|
|
&uart2 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart2_pins>;
|
status = "okay";
|
};
|
|
&uart3 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart3_pins>;
|
status = "okay";
|
};
|
|
/* USB */
|
&usb1 {
|
dr_mode = "host";
|
};
|
