// SPDX-License-Identifier: GPL-2.0+
|
/*
|
* comedi/drivers/8255.c
|
* Driver for 8255
|
*
|
* COMEDI - Linux Control and Measurement Device Interface
|
* Copyright (C) 1998 David A. Schleef <ds@schleef.org>
|
*/
|
|
/*
|
* Driver: 8255
|
* Description: generic 8255 support
|
* Devices: [standard] 8255 (8255)
|
* Author: ds
|
* Status: works
|
* Updated: Fri, 7 Jun 2002 12:56:45 -0700
|
*
|
* The classic in digital I/O. The 8255 appears in Comedi as a single
|
* digital I/O subdevice with 24 channels. The channel 0 corresponds
|
* to the 8255's port A, bit 0; channel 23 corresponds to port C, bit
|
* 7. Direction configuration is done in blocks, with channels 0-7,
|
* 8-15, 16-19, and 20-23 making up the 4 blocks. The only 8255 mode
|
* supported is mode 0.
|
*
|
* You should enable compilation this driver if you plan to use a board
|
* that has an 8255 chip. For multifunction boards, the main driver will
|
* configure the 8255 subdevice automatically.
|
*
|
* This driver also works independently with ISA and PCI cards that
|
* directly map the 8255 registers to I/O ports, including cards with
|
* multiple 8255 chips. To configure the driver for such a card, the
|
* option list should be a list of the I/O port bases for each of the
|
* 8255 chips. For example,
|
*
|
* comedi_config /dev/comedi0 8255 0x200,0x204,0x208,0x20c
|
*
|
* Note that most PCI 8255 boards do NOT work with this driver, and
|
* need a separate driver as a wrapper. For those that do work, the
|
* I/O port base address can be found in the output of 'lspci -v'.
|
*/
|
|
#include <linux/module.h>
|
#include "../comedidev.h"
|
|
#include "8255.h"
|
|
static int dev_8255_attach(struct comedi_device *dev,
|
struct comedi_devconfig *it)
|
{
|
struct comedi_subdevice *s;
|
unsigned long iobase;
|
int ret;
|
int i;
|
|
for (i = 0; i < COMEDI_NDEVCONFOPTS; i++) {
|
iobase = it->options[i];
|
if (!iobase)
|
break;
|
}
|
if (i == 0) {
|
dev_warn(dev->class_dev, "no devices specified\n");
|
return -EINVAL;
|
}
|
|
ret = comedi_alloc_subdevices(dev, i);
|
if (ret)
|
return ret;
|
|
for (i = 0; i < dev->n_subdevices; i++) {
|
s = &dev->subdevices[i];
|
iobase = it->options[i];
|
|
/*
|
* __comedi_request_region() does not set dev->iobase.
|
*
|
* For 8255 devices that are manually attached using
|
* comedi_config, the 'iobase' is the actual I/O port
|
* base address of the chip.
|
*/
|
ret = __comedi_request_region(dev, iobase, I8255_SIZE);
|
if (ret) {
|
s->type = COMEDI_SUBD_UNUSED;
|
} else {
|
ret = subdev_8255_init(dev, s, NULL, iobase);
|
if (ret) {
|
/*
|
* Release the I/O port region here, as the
|
* "detach" handler cannot find it.
|
*/
|
release_region(iobase, I8255_SIZE);
|
s->type = COMEDI_SUBD_UNUSED;
|
return ret;
|
}
|
}
|
}
|
|
return 0;
|
}
|
|
static void dev_8255_detach(struct comedi_device *dev)
|
{
|
struct comedi_subdevice *s;
|
int i;
|
|
for (i = 0; i < dev->n_subdevices; i++) {
|
s = &dev->subdevices[i];
|
if (s->type != COMEDI_SUBD_UNUSED) {
|
unsigned long regbase = subdev_8255_regbase(s);
|
|
release_region(regbase, I8255_SIZE);
|
}
|
}
|
}
|
|
static struct comedi_driver dev_8255_driver = {
|
.driver_name = "8255",
|
.module = THIS_MODULE,
|
.attach = dev_8255_attach,
|
.detach = dev_8255_detach,
|
};
|
module_comedi_driver(dev_8255_driver);
|
|
MODULE_AUTHOR("Comedi http://www.comedi.org");
|
MODULE_DESCRIPTION("Comedi driver for standalone 8255 devices");
|
MODULE_LICENSE("GPL");
|
