* ARM Versatile Platform Baseboard PCI interface
|
|
PCI host controller found on the ARM Versatile PB board's FPGA.
|
|
Required properties:
|
- compatible: should contain "arm,versatile-pci" to identify the Versatile PCI
|
controller.
|
- reg: base addresses and lengths of the PCI controller. There must be 3
|
entries:
|
- Versatile-specific registers
|
- Self Config space
|
- Config space
|
- #address-cells: set to <3>
|
- #size-cells: set to <2>
|
- device_type: set to "pci"
|
- bus-range: set to <0 0xff>
|
- ranges: ranges for the PCI memory and I/O regions
|
- #interrupt-cells: set to <1>
|
- interrupt-map-mask and interrupt-map: standard PCI properties to define
|
the mapping of the PCI interface to interrupt numbers.
|
|
Example:
|
|
pci-controller@10001000 {
|
compatible = "arm,versatile-pci";
|
device_type = "pci";
|
reg = <0x10001000 0x1000
|
0x41000000 0x10000
|
0x42000000 0x100000>;
|
bus-range = <0 0xff>;
|
#address-cells = <3>;
|
#size-cells = <2>;
|
#interrupt-cells = <1>;
|
|
ranges = <0x01000000 0 0x00000000 0x43000000 0 0x00010000 /* downstream I/O */
|
0x02000000 0 0x50000000 0x50000000 0 0x10000000 /* non-prefetchable memory */
|
0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */
|
|
interrupt-map-mask = <0x1800 0 0 7>;
|
interrupt-map = <0x1800 0 0 1 &sic 28
|
0x1800 0 0 2 &sic 29
|
0x1800 0 0 3 &sic 30
|
0x1800 0 0 4 &sic 27
|
|
0x1000 0 0 1 &sic 27
|
0x1000 0 0 2 &sic 28
|
0x1000 0 0 3 &sic 29
|
0x1000 0 0 4 &sic 30
|
|
0x0800 0 0 1 &sic 30
|
0x0800 0 0 2 &sic 27
|
0x0800 0 0 3 &sic 28
|
0x0800 0 0 4 &sic 29
|
|
0x0000 0 0 1 &sic 29
|
0x0000 0 0 2 &sic 30
|
0x0000 0 0 3 &sic 27
|
0x0000 0 0 4 &sic 28>;
|
};
|
