1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
| STMPE Touchscreen
| ----------------
|
| Required properties:
| - compatible: "st,stmpe-ts"
|
| Optional properties:
| - st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 ->
| 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
| -> 144 clocks), recommended is 4.
| - st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
| - st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
| reference)
| - st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
| - st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
| samples, 3 -> 8 samples)
| - st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
| 100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
| is 3
| - st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
| -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
| - st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
| the fractional part) recommended is 7
| - st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
| mA max, 1 -> 50 mA typical 80 mA max)
|
| Node name must be stmpe_touchscreen and should be child node of stmpe node to
| which it belongs.
|
| Example:
|
| stmpe_touchscreen {
| compatible = "st,stmpe-ts";
| st,sample-time = <4>;
| st,mod-12b = <1>;
| st,ref-sel = <0>;
| st,adc-freq = <1>;
| st,ave-ctrl = <1>;
| st,touch-det-delay = <2>;
| st,settling = <2>;
| st,fraction-z = <7>;
| st,i-drive = <1>;
| };
|
|
