/*
|
* linux/arch/unicore32/mm/proc-ucv2.S
|
*
|
* Code specific to PKUnity SoC and UniCore ISA
|
*
|
* Copyright (C) 2001-2010 GUAN Xue-tao
|
*
|
* This program is free software; you can redistribute it and/or modify
|
* it under the terms of the GNU General Public License version 2 as
|
* published by the Free Software Foundation.
|
*/
|
#include <linux/init.h>
|
#include <linux/linkage.h>
|
#include <asm/assembler.h>
|
#include <asm/hwcap.h>
|
#include <asm/pgtable-hwdef.h>
|
#include <asm/pgtable.h>
|
|
#include "proc-macros.S"
|
|
ENTRY(cpu_proc_fin)
|
stm.w (lr), [sp-]
|
mov ip, #PSR_R_BIT | PSR_I_BIT | PRIV_MODE
|
mov.a asr, ip
|
b.l __cpuc_flush_kern_all
|
ldm.w (pc), [sp]+
|
|
/*
|
* cpu_reset(loc)
|
*
|
* Perform a soft reset of the system. Put the CPU into the
|
* same state as it would be if it had been reset, and branch
|
* to what would be the reset vector.
|
*
|
* - loc - location to jump to for soft reset
|
*/
|
.align 5
|
ENTRY(cpu_reset)
|
mov ip, #0
|
movc p0.c5, ip, #28 @ Cache invalidate all
|
nop8
|
|
movc p0.c6, ip, #6 @ TLB invalidate all
|
nop8
|
|
movc ip, p0.c1, #0 @ ctrl register
|
or ip, ip, #0x2000 @ vector base address
|
andn ip, ip, #0x000f @ ............idam
|
movc p0.c1, ip, #0 @ disable caches and mmu
|
nop
|
mov pc, r0 @ jump to loc
|
nop8
|
|
/*
|
* cpu_do_idle()
|
*
|
* Idle the processor (eg, wait for interrupt).
|
*
|
* IRQs are already disabled.
|
*/
|
ENTRY(cpu_do_idle)
|
mov r0, #0 @ PCI address
|
.rept 8
|
ldw r1, [r0]
|
.endr
|
mov pc, lr
|
|
ENTRY(cpu_dcache_clean_area)
|
#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
|
csub.a r1, #MAX_AREA_SIZE
|
bsg 101f
|
mov r9, #PAGE_SZ
|
sub r9, r9, #1 @ PAGE_MASK
|
1: va2pa r0, r10, r11, r12, r13 @ r10 is PA
|
b 3f
|
2: cand.a r0, r9
|
beq 1b
|
3: movc p0.c5, r10, #11 @ clean D entry
|
nop8
|
add r0, r0, #CACHE_LINESIZE
|
add r10, r10, #CACHE_LINESIZE
|
sub.a r1, r1, #CACHE_LINESIZE
|
bua 2b
|
mov pc, lr
|
#endif
|
101: mov ip, #0
|
movc p0.c5, ip, #10 @ Dcache clean all
|
nop8
|
|
mov pc, lr
|
|
/*
|
* cpu_do_switch_mm(pgd_phys)
|
*
|
* Set the translation table base pointer to be pgd_phys
|
*
|
* - pgd_phys - physical address of new pgd
|
*
|
* It is assumed that:
|
* - we are not using split page tables
|
*/
|
.align 5
|
ENTRY(cpu_do_switch_mm)
|
movc p0.c2, r0, #0 @ update page table ptr
|
nop8
|
|
movc p0.c6, ip, #6 @ TLB invalidate all
|
nop8
|
|
mov pc, lr
|
|
/*
|
* cpu_set_pte(ptep, pte)
|
*
|
* Set a level 2 translation table entry.
|
*
|
* - ptep - pointer to level 2 translation table entry
|
* - pte - PTE value to store
|
*/
|
.align 5
|
ENTRY(cpu_set_pte)
|
stw r1, [r0]
|
#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
|
sub r2, r0, #PAGE_OFFSET
|
movc p0.c5, r2, #11 @ Dcache clean line
|
nop8
|
#else
|
mov ip, #0
|
movc p0.c5, ip, #10 @ Dcache clean all
|
nop8
|
@dcacheline_flush r0, r2, ip
|
#endif
|
mov pc, lr
|
