hc
2023-10-25 6c2073b7aa40e29d0eca7d571dd7bc590c7ecaa7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
Device-Tree bindings for tilcdc DRM generic panel output driver
 
Required properties:
 - compatible: value should be "ti,tilcdc,panel".
 - panel-info: configuration info to configure LCDC correctly for the panel
   - ac-bias: AC Bias Pin Frequency
   - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt
   - dma-burst-sz: DMA burst size
   - bpp: Bits per pixel
   - fdd: FIFO DMA Request Delay
   - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling
   - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore
   - raster-order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most
   - fifo-th: DMA FIFO threshold
 - display-timings: typical videomode of lcd panel.  Multiple video modes
   can be listed if the panel supports multiple timings, but the 'native-mode'
   should be the preferred/default resolution.  Refer to
   Documentation/devicetree/bindings/display/panel/display-timing.txt for display
   timing binding details.
 
Optional properties:
- backlight: phandle of the backlight device attached to the panel
- enable-gpios: GPIO pin to enable or disable the panel
 
Recommended properties:
 - pinctrl-names, pinctrl-0: the pincontrol settings to configure
   muxing properly for pins that connect to TFP410 device
 
Example:
 
   /* Settings for CDTech_S035Q01 / LCD3 cape: */
   lcd3 {
       compatible = "ti,tilcdc,panel";
       pinctrl-names = "default";
       pinctrl-0 = <&bone_lcd3_cape_lcd_pins>;
       backlight = <&backlight>;
       enable-gpios = <&gpio3 19 0>;
 
       panel-info {
           ac-bias           = <255>;
           ac-bias-intrpt    = <0>;
           dma-burst-sz      = <16>;
           bpp               = <16>;
           fdd               = <0x80>;
           sync-edge         = <0>;
           sync-ctrl         = <1>;
           raster-order      = <0>;
           fifo-th           = <0>;
       };
       display-timings {
           native-mode = <&timing0>;
           timing0: 320x240 {
               hactive         = <320>;
               vactive         = <240>;
               hback-porch     = <21>;
               hfront-porch    = <58>;
               hsync-len       = <47>;
               vback-porch     = <11>;
               vfront-porch    = <23>;
               vsync-len       = <2>;
               clock-frequency = <8000000>;
               hsync-active    = <0>;
               vsync-active    = <0>;
           };
       };
   };