/*
|
* Samsung Exynos7420 SoC device tree source
|
*
|
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
|
* http://www.samsung.com
|
*
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
/dts-v1/;
|
#include "skeleton.dtsi"
|
#include <dt-bindings/clock/exynos7420-clk.h>
|
/ {
|
compatible = "samsung,exynos7420";
|
|
fin_pll: xxti {
|
compatible = "fixed-clock";
|
clock-output-names = "fin_pll";
|
u-boot,dm-pre-reloc;
|
#clock-cells = <0>;
|
};
|
|
clock_topc: clock-controller@10570000 {
|
compatible = "samsung,exynos7-clock-topc";
|
reg = <0x10570000 0x10000>;
|
u-boot,dm-pre-reloc;
|
#clock-cells = <1>;
|
clocks = <&fin_pll>;
|
clock-names = "fin_pll";
|
};
|
|
clock_top0: clock-controller@105d0000 {
|
compatible = "samsung,exynos7-clock-top0";
|
reg = <0x105d0000 0xb000>;
|
u-boot,dm-pre-reloc;
|
#clock-cells = <1>;
|
clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
|
<&clock_topc DOUT_SCLK_BUS1_PLL>,
|
<&clock_topc DOUT_SCLK_CC_PLL>,
|
<&clock_topc DOUT_SCLK_MFC_PLL>;
|
clock-names = "fin_pll", "dout_sclk_bus0_pll",
|
"dout_sclk_bus1_pll", "dout_sclk_cc_pll",
|
"dout_sclk_mfc_pll";
|
};
|
|
clock_peric1: clock-controller@14c80000 {
|
compatible = "samsung,exynos7-clock-peric1";
|
reg = <0x14c80000 0xd00>;
|
u-boot,dm-pre-reloc;
|
#clock-cells = <1>;
|
clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>,
|
<&clock_top0 CLK_SCLK_UART1>,
|
<&clock_top0 CLK_SCLK_UART2>,
|
<&clock_top0 CLK_SCLK_UART3>;
|
clock-names = "fin_pll", "dout_aclk_peric1_66",
|
"sclk_uart1", "sclk_uart2", "sclk_uart3";
|
};
|
|
pinctrl@13470000 {
|
compatible = "samsung,exynos7420-pinctrl";
|
reg = <0x13470000 0x1000>;
|
u-boot,dm-pre-reloc;
|
|
serial2_bus: serial2-bus {
|
samsung,pins = "gpd1-4", "gpd1-5";
|
samsung,pin-function = <2>;
|
samsung,pin-pud = <3>;
|
samsung,pin-drv = <0>;
|
u-boot,dm-pre-reloc;
|
};
|
};
|
|
serial@14C30000 {
|
compatible = "samsung,exynos4210-uart";
|
reg = <0x14C30000 0x100>;
|
u-boot,dm-pre-reloc;
|
clocks = <&clock_peric1 PCLK_UART2>,
|
<&clock_peric1 SCLK_UART2>;
|
clock-names = "uart", "clk_uart_baud0";
|
pinctrl-names = "default";
|
pinctrl-0 = <&serial2_bus>;
|
};
|
};
|
