Samsung S3C24XX Interrupt Controllers
|
|
The S3C24XX SoCs contain a custom set of interrupt controllers providing a
|
varying number of interrupt sources. The set consists of a main- and sub-
|
controller and on newer SoCs even a second main controller.
|
|
Required properties:
|
- compatible: Compatible property value should be "samsung,s3c2410-irq"
|
for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later.
|
|
- reg: Physical base address of the controller and length of memory mapped
|
region.
|
|
- interrupt-controller : Identifies the node as an interrupt controller
|
|
- #interrupt-cells : Specifies the number of cells needed to encode an
|
interrupt source. The value shall be 4 and interrupt descriptor shall
|
have the following format:
|
<ctrl_num parent_irq ctrl_irq type>
|
|
ctrl_num contains the controller to use:
|
- 0 ... main controller
|
- 1 ... sub controller
|
- 2 ... second main controller on s3c2416 and s3c2450
|
parent_irq contains the parent bit in the main controller and will be
|
ignored in main controllers
|
ctrl_irq contains the interrupt bit of the controller
|
type contains the trigger type to use
|
|
Example:
|
|
interrupt-controller@4a000000 {
|
compatible = "samsung,s3c2410-irq";
|
reg = <0x4a000000 0x100>;
|
interrupt-controller;
|
#interrupt-cells=<4>;
|
};
|
|
[...]
|
|
serial@50000000 {
|
compatible = "samsung,s3c2410-uart";
|
reg = <0x50000000 0x4000>;
|
interrupt-parent = <&subintc>;
|
interrupts = <1 28 0 4>, <1 28 1 4>;
|
};
|
|
rtc@57000000 {
|
compatible = "samsung,s3c2410-rtc";
|
reg = <0x57000000 0x100>;
|
interrupt-parent = <&intc>;
|
interrupts = <0 30 0 3>, <0 8 0 3>;
|
};
|
