* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
|
|
The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
|
an active array size of 3864H x 2202V. It is programmable through I2C
|
interface. The I2C address is fixed to 0x1a as per sensor data sheet.
|
Image data is sent through MIPI CSI-2, which is configured as 4 lanes
|
at 1440 Mbps.
|
|
|
Required Properties:
|
- compatible: value should be "sony,imx274" for imx274 sensor
|
- reg: I2C bus address of the device
|
|
Optional Properties:
|
- reset-gpios: Sensor reset GPIO
|
|
The imx274 device node should contain one 'port' child node with
|
an 'endpoint' subnode. For further reading on port node refer to
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
Example:
|
sensor@1a {
|
compatible = "sony,imx274";
|
reg = <0x1a>;
|
#address-cells = <1>;
|
#size-cells = <0>;
|
reset-gpios = <&gpio_sensor 0 0>;
|
port {
|
sensor_out: endpoint {
|
remote-endpoint = <&csiss_in>;
|
};
|
};
|
};
|
