QorIQ DPAA Queue Manager Portals Device Tree Binding 
 | 
  
 | 
Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. 
 | 
  
 | 
CONTENTS 
 | 
  
 | 
    - QMan Portal 
 | 
    - Example 
 | 
  
 | 
QMan Portal Node 
 | 
  
 | 
Portals are memory mapped interfaces to QMan that allow low-latency, lock-less 
 | 
interaction by software running on processor cores, accelerators and network 
 | 
interfaces with the QMan 
 | 
  
 | 
PROPERTIES 
 | 
  
 | 
- compatible 
 | 
    Usage:        Required 
 | 
    Value type:    <stringlist> 
 | 
    Definition:    Must include "fsl,qman-portal-<hardware revision>" 
 | 
            May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal" 
 | 
  
 | 
- reg 
 | 
    Usage:        Required 
 | 
    Value type:    <prop-encoded-array> 
 | 
    Definition:    Two regions. The first is the cache-enabled region of 
 | 
            the portal. The second is the cache-inhibited region of 
 | 
            the portal 
 | 
  
 | 
- interrupts 
 | 
    Usage:        Required 
 | 
    Value type:    <prop-encoded-array> 
 | 
    Definition:    Standard property 
 | 
  
 | 
- fsl,liodn 
 | 
    Usage:        See pamu.txt 
 | 
    Value type:    <prop-encoded-array> 
 | 
    Definition:    Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN 
 | 
            (FLIODN) 
 | 
  
 | 
- fsl,iommu-parent 
 | 
    Usage:        See pamu.txt 
 | 
    Value type:    <phandle> 
 | 
    Definition:    PAMU property used for dynamic LIODN assignment 
 | 
  
 | 
    For additional details about the PAMU/LIODN binding(s) see pamu.txt 
 | 
  
 | 
- cell-index 
 | 
    Usage:        Required 
 | 
    Value type:    <u32> 
 | 
    Definition:    The hardware index of the channel. This can also be 
 | 
            determined by dividing any of the channel's 8 work queue 
 | 
            IDs by 8 
 | 
  
 | 
In addition to these properties the qman-portals should have sub-nodes to 
 | 
represent the HW devices/portals that are connected to the software portal 
 | 
described here 
 | 
  
 | 
The currently supported sub-nodes are: 
 | 
    * fman0 
 | 
    * fman1 
 | 
    * pme 
 | 
    * crypto 
 | 
  
 | 
These subnodes should have the following properties: 
 | 
  
 | 
- fsl,liodn 
 | 
    Usage:        See pamu.txt 
 | 
    Value type:    <prop-encoded-array> 
 | 
    Definition:    PAMU property used for static LIODN assignment 
 | 
  
 | 
- fsl,iommu-parent 
 | 
    Usage:        See pamu.txt 
 | 
    Value type:    <phandle> 
 | 
    Definition:    PAMU property used for dynamic LIODN assignment 
 | 
  
 | 
- dev-handle 
 | 
    Usage:        Required 
 | 
    Value type:    <phandle> 
 | 
    Definition:    The phandle to the particular hardware device that this 
 | 
            portal is connected to. 
 | 
  
 | 
EXAMPLE 
 | 
  
 | 
The example below shows a (P4080) QMan portals container/bus node with two portals 
 | 
  
 | 
    qman-portals@ff4200000 { 
 | 
        #address-cells = <1>; 
 | 
        #size-cells = <1>; 
 | 
        compatible = "simple-bus"; 
 | 
        ranges = <0 0xf 0xf4200000 0x200000>; 
 | 
  
 | 
        qman-portal@0 { 
 | 
            compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal"; 
 | 
            reg = <0 0x4000>, <0x100000 0x1000>; 
 | 
            interrupts = <104 2 0 0>; 
 | 
            fsl,liodn = <1 2>; 
 | 
            fsl,qman-channel-id = <0>; 
 | 
  
 | 
            fman0 { 
 | 
                fsl,liodn = <0x21>; 
 | 
                dev-handle = <&fman0>; 
 | 
            }; 
 | 
            fman1 { 
 | 
                fsl,liodn = <0xa1>; 
 | 
                dev-handle = <&fman1>; 
 | 
            }; 
 | 
            crypto { 
 | 
                fsl,liodn = <0x41 0x66>; 
 | 
                dev-handle = <&crypto>; 
 | 
            }; 
 | 
        }; 
 | 
        qman-portal@4000 { 
 | 
            compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal"; 
 | 
            reg = <0x4000 0x4000>, <0x101000 0x1000>; 
 | 
            interrupts = <106 2 0 0>; 
 | 
            fsl,liodn = <3 4>; 
 | 
            cell-index = <1>; 
 | 
  
 | 
            fman0 { 
 | 
                fsl,liodn = <0x22>; 
 | 
                dev-handle = <&fman0>; 
 | 
            }; 
 | 
            fman1 { 
 | 
                fsl,liodn = <0xa2>; 
 | 
                dev-handle = <&fman1>; 
 | 
            }; 
 | 
            crypto { 
 | 
                fsl,liodn = <0x42 0x67>; 
 | 
                dev-handle = <&crypto>; 
 | 
            }; 
 | 
        }; 
 | 
    }; 
 |