* AT86RF230 IEEE 802.15.4 *
|
|
Required properties:
|
- compatible: should be "atmel,at86rf230", "atmel,at86rf231",
|
"atmel,at86rf233" or "atmel,at86rf212"
|
- spi-max-frequency: maximal bus speed, should be set to 7500000 depends
|
sync or async operation mode
|
- reg: the chipselect index
|
- interrupts: the interrupt generated by the device. Non high-level
|
can occur deadlocks while handling isr.
|
|
Optional properties:
|
- reset-gpio: GPIO spec for the rstn pin
|
- sleep-gpio: GPIO spec for the slp_tr pin
|
- xtal-trim: u8 value for fine tuning the internal capacitance
|
arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF
|
|
Example:
|
|
at86rf231@0 {
|
compatible = "atmel,at86rf231";
|
spi-max-frequency = <7500000>;
|
reg = <0>;
|
interrupts = <19 4>;
|
interrupt-parent = <&gpio3>;
|
xtal-trim = /bits/ 8 <0x06>;
|
};
|
