* Nextchip NVP6158 AHD to BT656/BT1120 decoder
|
|
Required Properties:
|
- compatible: should be "nvp6158-v4l2"
|
- clocks: reference to the Single 27M Oscillator.
|
- clock-names: should be "xvclk".
|
- pwr-gpios: High active nvp6158 power gpio
|
- pwr2-gpios: High active ahd camera power gpio
|
- pwdn-gpios: High active nvp6158 pwdn gpio
|
- pwdn2-gpios: High active ahd camera pwdn gpio
|
- rst-gpios: High active nvp6158 reset gpio
|
- rst2-gpios: High active ahd camera reset gpio
|
Optional Properties:
|
- rockchip,dvp_mode: BT656 or BT1120 or BT656_TEST
|
- rockchip,channel_nums: channel nums, 1/2/4
|
- rockchip,dual_edge: dual edge, 0/1
|
|
NVP6158 device address 0x30(7bit);
|
The device node must contain one 'port' child node for its digital output
|
video port, in accordance with the video interface bindings defined in
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
Example:
|
|
&i2c1 {
|
status = "okay";
|
|
nvp6158: nvp6158@30 {
|
compatible = "nvp6158-v4l2";
|
status = "okay";
|
reg = <0x30>;
|
clocks = <&cru CLK_CIF_OUT>;
|
clock-names = "xvclk";
|
power-domains = <&power RK3568_PD_VI>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&cif_clk &cif_dvp_clk &cif_dvp_bus8 &cif_dvp_bus16>;
|
pwr-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
|
pwr2-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
rst-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
|
/*rst2-gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;*/
|
/*pwdn-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;*/
|
/*pwdn2-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;*/
|
rockchip,camera-module-index = <0>;
|
rockchip,camera-module-facing = "back";
|
rockchip,camera-module-name = "default";
|
rockchip,camera-module-lens-name = "default";
|
rockchip,dvp_mode = "BT1120"; //BT656 or BT1120 or BT656_TEST
|
rockchip,channel_nums = <4>; //channel nums, 1/2/4
|
rockchip,dual_edge = <1>; // pclk dual edge, 0/1
|
rockchip,default_rect= <1920 1080>; // default resolution
|
port {
|
nvp6158_out: endpoint {
|
remote-endpoint = <&dvp_in_bcam1>;
|
};
|
};
|
};
|
};
|
