1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
| * Texas Instruments LMP91000 series of potentiostats
|
| LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
| LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
|
| Required properties:
|
| - compatible: should be one of the following:
| "ti,lmp91000"
| "ti,lmp91002"
| - reg: the I2C address of the device
| - io-channels: the phandle of the iio provider
|
| - ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this
| needs to be set to signal that an external resistor value is being used.
|
| Optional properties:
|
| - ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance
| amplifier. Must be 2750, 3500, 7000, 14000, 35000, 120000, or 350000 ohms.
|
| - ti,rload-ohm: ohm value of the internal resistor load applied to the gas
| sensor. Must be 10, 33, 50, or 100 (default) ohms.
|
| Example:
|
| lmp91000@48 {
| compatible = "ti,lmp91000";
| reg = <0x48>;
| ti,tia-gain-ohm = <7500>;
| ti,rload = <100>;
| io-channels = <&adc>;
| };
|
|
