SAMSUNG Exynos SoC series PMU Registers
|
|
Properties:
|
- compatible : should contain two values. First value must be one from following list:
|
- "samsung,exynos3250-pmu" - for Exynos3250 SoC,
|
- "samsung,exynos4210-pmu" - for Exynos4210 SoC,
|
- "samsung,exynos4412-pmu" - for Exynos4412 SoC,
|
- "samsung,exynos5250-pmu" - for Exynos5250 SoC,
|
- "samsung,exynos5260-pmu" - for Exynos5260 SoC.
|
- "samsung,exynos5410-pmu" - for Exynos5410 SoC,
|
- "samsung,exynos5420-pmu" - for Exynos5420 SoC.
|
- "samsung,exynos5433-pmu" - for Exynos5433 SoC.
|
- "samsung,exynos7-pmu" - for Exynos7 SoC.
|
second value must be always "syscon".
|
|
- reg : offset and length of the register set.
|
|
- #clock-cells : must be <1>, since PMU requires once cell as clock specifier.
|
The single specifier cell is used as index to list of clocks
|
provided by PMU, which is currently:
|
0 : SoC clock output (CLKOUT pin)
|
|
- clock-names : list of clock names for particular CLKOUT mux inputs in
|
following format:
|
"clkoutN", where N is a decimal number corresponding to
|
CLKOUT mux control bits value for given input, e.g.
|
"clkout0", "clkout7", "clkout15".
|
|
- clocks : list of phandles and specifiers to all input clocks listed in
|
clock-names property.
|
|
Optional properties:
|
|
Some PMUs are capable of behaving as an interrupt controller (mostly
|
to wake up a suspended PMU). In which case, they can have the
|
following properties:
|
|
- interrupt-controller: indicate that said PMU is an interrupt controller
|
|
- #interrupt-cells: must be identical to the that of the parent interrupt
|
controller.
|
|
|
Optional nodes:
|
|
- nodes defining the restart and poweroff syscon children
|
|
|
Example :
|
pmu_system_controller: system-controller@10040000 {
|
compatible = "samsung,exynos5250-pmu", "syscon";
|
reg = <0x10040000 0x5000>;
|
interrupt-controller;
|
#interrupt-cells = <3>;
|
interrupt-parent = <&gic>;
|
#clock-cells = <1>;
|
clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
|
"clkout4", "clkout8", "clkout9";
|
clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
|
<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
|
<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
|
<&clock CLK_XUSBXTI>;
|
};
|
|
Example of clock consumer :
|
|
usb3503: usb3503@8 {
|
/* ... */
|
clock-names = "refclk";
|
clocks = <&pmu_system_controller 0>;
|
/* ... */
|
};
|
