/* SPDX-License-Identifier: GPL-2.0 */
|
/*
|
* Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
|
* All rights reserved.
|
*/
|
|
#ifndef WILC_WLAN_IF_H
|
#define WILC_WLAN_IF_H
|
|
#include <linux/netdevice.h>
|
|
/********************************************
|
*
|
* Host Interface Defines
|
*
|
********************************************/
|
|
#define HIF_SDIO (0)
|
#define HIF_SPI BIT(0)
|
|
/********************************************
|
*
|
* Wlan Interface Defines
|
*
|
********************************************/
|
|
struct sdio_cmd52 {
|
u32 read_write: 1;
|
u32 function: 3;
|
u32 raw: 1;
|
u32 address: 17;
|
u32 data: 8;
|
};
|
|
struct sdio_cmd53 {
|
u32 read_write: 1;
|
u32 function: 3;
|
u32 block_mode: 1;
|
u32 increment: 1;
|
u32 address: 17;
|
u32 count: 9;
|
u8 *buffer;
|
u32 block_size;
|
};
|
|
#define MAC_STATUS_INIT -1
|
#define MAC_STATUS_CONNECTED 1
|
#define MAC_STATUS_DISCONNECTED 0
|
|
struct tx_complete_data {
|
int size;
|
void *buff;
|
u8 *bssid;
|
struct sk_buff *skb;
|
};
|
|
typedef void (*wilc_tx_complete_func_t)(void *, int);
|
|
#define WILC_TX_ERR_NO_BUF (-2)
|
|
/********************************************
|
*
|
* Wlan Configuration ID
|
*
|
********************************************/
|
#define WILC_MULTICAST_TABLE_SIZE 8
|
#define MAX_SSID_LEN 33
|
#define MAX_RATES_SUPPORTED 12
|
|
enum bss_types {
|
INFRASTRUCTURE = 0,
|
INDEPENDENT,
|
AP,
|
};
|
|
enum {
|
B_ONLY_MODE = 0, /* 1, 2 M, otherwise 5, 11 M */
|
G_ONLY_MODE, /* 6,12,24 otherwise 9,18,36,48,54 */
|
G_MIXED_11B_1_MODE, /* 1,2,5.5,11 otherwise all on */
|
G_MIXED_11B_2_MODE, /* 1,2,5,11,6,12,24 otherwise all on */
|
};
|
|
enum {
|
G_SHORT_PREAMBLE = 0, /* Short Preamble */
|
G_LONG_PREAMBLE = 1, /* Long Preamble */
|
G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */
|
};
|
|
enum {
|
PASSIVE_SCAN = 0,
|
ACTIVE_SCAN = 1,
|
};
|
|
enum {
|
NO_POWERSAVE = 0,
|
MIN_FAST_PS = 1,
|
MAX_FAST_PS = 2,
|
MIN_PSPOLL_PS = 3,
|
MAX_PSPOLL_PS = 4
|
};
|
|
enum chip_ps_states {
|
CHIP_WAKEDUP = 0,
|
CHIP_SLEEPING_AUTO = 1,
|
CHIP_SLEEPING_MANUAL = 2
|
};
|
|
enum bus_acquire {
|
ACQUIRE_ONLY = 0,
|
ACQUIRE_AND_WAKEUP = 1,
|
};
|
|
enum bus_release {
|
RELEASE_ONLY = 0,
|
RELEASE_ALLOW_SLEEP = 1,
|
};
|
|
enum {
|
NO_SECURITY = 0,
|
WEP_40 = 0x3,
|
WEP_104 = 0x7,
|
WPA_AES = 0x29,
|
WPA_TKIP = 0x49,
|
WPA_AES_TKIP = 0x69, /* Aes or Tkip */
|
WPA2_AES = 0x31,
|
WPA2_TKIP = 0x51,
|
WPA2_AES_TKIP = 0x71, /* Aes or Tkip */
|
};
|
|
enum authtype {
|
OPEN_SYSTEM = 1,
|
SHARED_KEY = 2,
|
ANY = 3,
|
IEEE8021 = 5
|
};
|
|
enum site_survey {
|
SITE_SURVEY_1CH = 0,
|
SITE_SURVEY_ALL_CH = 1,
|
SITE_SURVEY_OFF = 2
|
};
|
|
enum {
|
NORMAL_ACK = 0,
|
NO_ACK,
|
};
|
|
enum {
|
REKEY_DISABLE = 1,
|
REKEY_TIME_BASE,
|
REKEY_PKT_BASE,
|
REKEY_TIME_PKT_BASE
|
};
|
|
enum {
|
FILTER_NO = 0x00,
|
FILTER_AP_ONLY = 0x01,
|
FILTER_STA_ONLY = 0x02
|
};
|
|
enum {
|
AUTO_PROT = 0, /* Auto */
|
NO_PROT, /* Do not use any protection */
|
ERP_PROT, /* Protect all ERP frame exchanges */
|
HT_PROT, /* Protect all HT frame exchanges */
|
GF_PROT, /* Protect all GF frame exchanges */
|
};
|
|
enum {
|
G_SELF_CTS_PROT,
|
G_RTS_CTS_PROT,
|
};
|
|
enum {
|
HT_MIXED_MODE = 1,
|
HT_ONLY_20MHZ_MODE,
|
HT_ONLY_20_40MHZ_MODE,
|
};
|
|
enum {
|
NO_DETECT = 0,
|
DETECT_ONLY = 1,
|
DETECT_PROTECT = 2,
|
DETECT_PROTECT_REPORT = 3,
|
};
|
|
enum {
|
RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */
|
FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */
|
LSIG_TXOP_PROT, /* LSIG TXOP Protection */
|
FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */
|
};
|
|
enum {
|
STATIC_MODE = 1,
|
DYNAMIC_MODE = 2,
|
MIMO_MODE = 3, /* power save disable */
|
};
|
|
enum wid_type {
|
WID_CHAR = 0,
|
WID_SHORT = 1,
|
WID_INT = 2,
|
WID_STR = 3,
|
WID_BIN_DATA = 4,
|
WID_BIN = 5,
|
WID_IP = 6,
|
WID_ADR = 7,
|
WID_UNDEF = 8,
|
WID_TYPE_FORCE_32BIT = 0xFFFFFFFF
|
};
|
|
struct wid {
|
u16 id;
|
enum wid_type type;
|
s32 size;
|
s8 *val;
|
};
|
|
enum {
|
WID_NIL = 0xffff,
|
|
/*
|
* BSS Type
|
* -----------------------------------------------------------
|
* Configuration : Infrastructure Independent Access Point
|
* Values to set : 0 1 2
|
* -----------------------------------------------------------
|
*/
|
WID_BSS_TYPE = 0x0000,
|
|
/*
|
* Transmit Rate
|
* -----------------------------------------------------------
|
* Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54
|
* Values to set : 1 2 5 11 6 9 12 18 24 36 48 54
|
* -----------------------------------------------------------
|
*/
|
WID_CURRENT_TX_RATE = 0x0001,
|
|
/*
|
* Channel
|
* -----------------------------------------------------------
|
* Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14
|
* Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14
|
* -----------------------------------------------------------
|
*/
|
WID_CURRENT_CHANNEL = 0x0002,
|
|
/*
|
* Preamble
|
* -----------------------------------------------------------
|
* Configuration : short long Auto
|
* Values to set : 0 1 2
|
* -----------------------------------------------------------
|
*/
|
WID_PREAMBLE = 0x0003,
|
|
/*
|
* 11g operating mode (ignored if 11g not present)
|
* -----------------------------------------------------------
|
* Configuration : HighPerf Compat(RSet #1) Compat(RSet #2)
|
* Values to set : 1 2 3
|
* -----------------------------------------------------------
|
*/
|
WID_11G_OPERATING_MODE = 0x0004,
|
|
/*
|
* Mac status (response only)
|
* -----------------------------------------------------------
|
* Configuration : disconnect connect
|
* Values to get : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_STATUS = 0x0005,
|
|
/*
|
* Scan type
|
* -----------------------------------------------------------
|
* Configuration : Passive Scanning Active Scanning
|
* Values to set : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_SCAN_TYPE = 0x0007,
|
|
/*
|
* Key Id (WEP default key Id)
|
* -----------------------------------------------------------
|
* Configuration : Any value between 0 to 3
|
* Values to set : Same value. Default is 0
|
* -----------------------------------------------------------
|
*/
|
WID_KEY_ID = 0x0009,
|
|
/*
|
* QoS Enable
|
* -----------------------------------------------------------
|
* Configuration : QoS Disable WMM Enable
|
* Values to set : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_QOS_ENABLE = 0x000A,
|
|
/*
|
* Power Management
|
* -----------------------------------------------------------
|
* Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE
|
* Values to set : 0 1 2
|
* -----------------------------------------------------------
|
*/
|
WID_POWER_MANAGEMENT = 0x000B,
|
|
/*
|
* WEP/802 11I Configuration
|
* -----------------------------------------------------------
|
* Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP
|
* Values (0x) : 00 03 07 29 49 31 51
|
* Configuration:WPA-AES+TKIP RSN-AES+TKIP
|
* Values (0x) : 69 71
|
* -----------------------------------------------------------
|
*/
|
WID_11I_MODE = 0x000C,
|
|
/*
|
* WEP Configuration: Used in BSS STA mode only when WEP is enabled
|
* -----------------------------------------------------------
|
* Configuration : Open System Shared Key Any Type | 802.1x Auth
|
* Values (0x) : 01 02 03 | BIT2
|
* -----------------------------------------------------------
|
*/
|
WID_AUTH_TYPE = 0x000D,
|
|
/*
|
* Site Survey Type
|
* -----------------------------------------------------------
|
* Configuration : Values to set
|
* Survey 1 Channel : 0
|
* survey all Channels : 1
|
* Disable Site Survey : 2
|
* -----------------------------------------------------------
|
*/
|
WID_SITE_SURVEY = 0x000E,
|
|
/*
|
* Listen Interval
|
* -----------------------------------------------------------
|
* Configuration : Any value between 1 to 255
|
* Values to set : Same value. Default is 3
|
* -----------------------------------------------------------
|
*/
|
WID_LISTEN_INTERVAL = 0x000F,
|
|
/*
|
* DTIM Period
|
* -----------------------------------------------------------
|
* Configuration : Any value between 1 to 255
|
* Values to set : Same value. Default is 3
|
* -----------------------------------------------------------
|
*/
|
WID_DTIM_PERIOD = 0x0010,
|
|
/*
|
* ACK Policy
|
* -----------------------------------------------------------
|
* Configuration : Normal Ack No Ack
|
* Values to set : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_ACK_POLICY = 0x0011,
|
|
/*
|
* Reset MAC (Set only)
|
* -----------------------------------------------------------
|
* Configuration : Don't Reset Reset No Request
|
* Values to set : 0 1 2
|
* -----------------------------------------------------------
|
*/
|
WID_RESET = 0x0012,
|
|
/*
|
* Broadcast SSID Option: Setting this will adhere to "" SSID element
|
* -----------------------------------------------------------
|
* Configuration : Enable Disable
|
* Values to set : 1 0
|
* -----------------------------------------------------------
|
*/
|
WID_BCAST_SSID = 0x0015,
|
|
/*
|
* Disconnect (Station)
|
* -----------------------------------------------------------
|
* Configuration : Association ID
|
* Values to set : Association ID
|
* -----------------------------------------------------------
|
*/
|
WID_DISCONNECT = 0x0016,
|
|
/*
|
* 11a Tx Power Level
|
* -----------------------------------------------------------
|
* Configuration : Sets TX Power (Higher the value greater the power)
|
* Values to set : Any value between 0 and 63 (inclusive Default 48)
|
* -----------------------------------------------------------
|
*/
|
WID_TX_POWER_LEVEL_11A = 0x0018,
|
|
/*
|
* Group Key Update Policy Selection
|
* -----------------------------------------------------------
|
* Configuration : Disabled timeBased packetBased timePacketBased
|
* Values to set : 1 2 3 4
|
* -----------------------------------------------------------
|
*/
|
WID_REKEY_POLICY = 0x0019,
|
|
/*
|
* Allow Short Slot
|
* -----------------------------------------------------------
|
* Configuration : Disallow Short Slot Allow Short Slot
|
* (Enable Only Long Slot) (Enable Short Slot if applicable)
|
* Values to set : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_SHORT_SLOT_ALLOWED = 0x001A,
|
|
WID_PHY_ACTIVE_REG = 0x001B,
|
|
/*
|
* 11b Tx Power Level
|
* -----------------------------------------------------------
|
* Configuration : Sets TX Power (Higher the value greater the power)
|
* Values to set : Any value between 0 and 63 (inclusive Default 48)
|
* -----------------------------------------------------------
|
*/
|
WID_TX_POWER_LEVEL_11B = 0x001D,
|
|
/*
|
* Scan Request
|
* -----------------------------------------------------------
|
* Configuration : Request default scan
|
* Values to set : 0
|
* -----------------------------------------------------------
|
*/
|
WID_START_SCAN_REQ = 0x001E,
|
|
/*
|
* Rssi (get only)
|
* -----------------------------------------------------------
|
* Configuration :
|
* Values to get : Rssi value
|
* -----------------------------------------------------------
|
*/
|
WID_RSSI = 0x001F,
|
|
/*
|
* Join Request
|
* -----------------------------------------------------------
|
* Configuration : Request to join
|
* Values to set : index of scan result
|
* -----------------------------------------------------------
|
*/
|
WID_JOIN_REQ = 0x0020,
|
|
WID_LINKSPEED = 0x0026,
|
|
/*
|
* Enable User Control of TX Power
|
* -----------------------------------------------------------
|
* Configuration : Disable Enable
|
* Values to set : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_USER_CONTROL_ON_TX_POWER = 0x0027,
|
|
WID_MEMORY_ACCESS_8BIT = 0x0029,
|
|
/*
|
* Enable Auto RX Sensitivity feature
|
* -----------------------------------------------------------
|
* Configuration : Disable Enable
|
* Values to set : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_AUTO_RX_SENSITIVITY = 0x0032,
|
|
/*
|
* Receive Buffer Based Ack
|
* -----------------------------------------------------------
|
* Configuration : Disable Enable
|
* Values to set : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_DATAFLOW_CONTROL = 0x0033,
|
|
/*
|
* Scan Filter
|
* -----------------------------------------------------------
|
* Configuration : Class No filter AP only Station Only
|
* Values to set : 0 1 2
|
* Configuration : Priority High Rssi Low Rssi Detect
|
* Values to set : 0 0x4 0x0
|
* Configuration : Channel filter off filter on
|
* Values to set : 0 0x10
|
* -----------------------------------------------------------
|
*/
|
WID_SCAN_FILTER = 0x0036,
|
|
/*
|
* Link Loss Threshold (measure in the beacon period)
|
* -----------------------------------------------------------
|
* Configuration : Any value between 10 and 254(Set to 255 disable)
|
* Values to set : Same value. Default is 10
|
* -----------------------------------------------------------
|
*/
|
WID_LINK_LOSS_THRESHOLD = 0x0037,
|
|
WID_ABORT_RUNNING_SCAN = 0x003E,
|
|
/* NMAC Character WID list */
|
WID_WPS_START = 0x0043,
|
|
/*
|
* Protection mode for MAC
|
* -----------------------------------------------------------
|
* Configuration : Auto No protection ERP HT GF
|
* Values to set : 0 1 2 3 4
|
* -----------------------------------------------------------
|
*/
|
WID_11N_PROT_MECH = 0x0080,
|
|
/*
|
* ERP Protection type for MAC
|
* -----------------------------------------------------------
|
* Configuration : Self-CTS RTS-CTS
|
* Values to set : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_11N_ERP_PROT_TYPE = 0x0081,
|
|
/*
|
* HT Option Enable
|
* -----------------------------------------------------------
|
* Configuration : HT Enable HT Disable
|
* Values to set : 1 0
|
* -----------------------------------------------------------
|
*/
|
WID_11N_ENABLE = 0x0082,
|
|
/*
|
* 11n Operating mode (Note that 11g operating mode will also be
|
* used in addition to this, if this is set to HT Mixed mode)
|
* -----------------------------------------------------------
|
* Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz
|
* Values to set : 1 2 3
|
* -----------------------------------------------------------
|
*/
|
WID_11N_OPERATING_MODE = 0x0083,
|
|
/*
|
* 11n OBSS non-HT STA Detection flag
|
* -----------------------------------------------------------
|
* Configuration : Do not detect
|
* Values to set : 0
|
* Configuration : Detect, do not protect or report
|
* Values to set : 1
|
* Configuration : Detect, protect and do not report
|
* Values to set : 2
|
* Configuration : Detect, protect and report to other BSS
|
* Values to set : 3
|
* -----------------------------------------------------------
|
*/
|
WID_11N_OBSS_NONHT_DETECTION = 0x0084,
|
|
/*
|
* 11n HT Protection Type
|
* -----------------------------------------------------------
|
* Configuration : RTS-CTS First Frame Exchange at non-HT-rate
|
* Values to set : 0 1
|
* Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt
|
* Values to set : 2 3
|
* -----------------------------------------------------------
|
*/
|
WID_11N_HT_PROT_TYPE = 0x0085,
|
|
/*
|
* 11n RIFS Protection Enable Flag
|
* -----------------------------------------------------------
|
* Configuration : Disable Enable
|
* Values to set : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_11N_RIFS_PROT_ENABLE = 0x0086,
|
|
/*
|
* SMPS Mode
|
* -----------------------------------------------------------
|
* Configuration : Static Dynamic MIMO (Power Save Disabled)
|
* Values to set : 1 2 3
|
* -----------------------------------------------------------
|
*/
|
WID_11N_SMPS_MODE = 0x0087,
|
|
/*
|
* Current transmit MCS
|
* -----------------------------------------------------------
|
* Configuration : MCS Index for data rate
|
* Values to set : 0 to 7
|
* -----------------------------------------------------------
|
*/
|
WID_11N_CURRENT_TX_MCS = 0x0088,
|
|
WID_11N_PRINT_STATS = 0x0089,
|
|
/*
|
* 11n Short GI Enable Flag
|
* -----------------------------------------------------------
|
* Configuration : Disable Enable
|
* Values to set : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_11N_SHORT_GI_ENABLE = 0x008D,
|
|
/*
|
* 11n RIFS Enable Flag
|
* -----------------------------------------------------------
|
* Configuration : Disable Enable
|
* Values to set : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_RIFS_MODE = 0x0094,
|
|
/*
|
* TX Abort Feature
|
* -----------------------------------------------------------
|
* Configuration : Disable Self CTS Enable Self CTS
|
* Values to set : 0 1
|
* Configuration : Disable TX Abort Enable TX Abort
|
* Values to set : 2 3
|
* Configuration : Enable HW TX Abort Enable SW TX Abort
|
* Values to set : 4 5
|
* -----------------------------------------------------------
|
*/
|
WID_TX_ABORT_CONFIG = 0x00A1,
|
|
WID_REG_TSSI_11B_VALUE = 0x00A6,
|
WID_REG_TSSI_11G_VALUE = 0x00A7,
|
WID_REG_TSSI_11N_VALUE = 0x00A8,
|
WID_TX_CALIBRATION = 0x00A9,
|
WID_DSCR_TSSI_11B_VALUE = 0x00AA,
|
WID_DSCR_TSSI_11G_VALUE = 0x00AB,
|
WID_DSCR_TSSI_11N_VALUE = 0x00AC,
|
|
/*
|
* Immediate Block-Ack Support
|
* -----------------------------------------------------------
|
* Configuration : Disable Enable
|
* Values to set : 0 1
|
* -----------------------------------------------------------
|
*/
|
WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF,
|
|
/*
|
* TXOP Disable Flag
|
* -----------------------------------------------------------
|
* Configuration : Disable Enable
|
* Values to set : 1 0
|
* -----------------------------------------------------------
|
*/
|
WID_11N_TXOP_PROT_DISABLE = 0x00B0,
|
|
WID_TX_POWER_LEVEL_11N = 0x00B1,
|
|
/* Custom Character WID list */
|
WID_PC_TEST_MODE = 0x00C8,
|
/* SCAN Complete notification WID*/
|
WID_SCAN_COMPLETE = 0x00C9,
|
|
WID_DEL_BEACON = 0x00CA,
|
|
WID_LOG_TERMINAL_SWITCH = 0x00CD,
|
WID_TX_POWER = 0x00CE,
|
/* EMAC Short WID list */
|
/* RTS Threshold */
|
/*
|
* -----------------------------------------------------------
|
* Configuration : Any value between 256 to 2347
|
* Values to set : Same value. Default is 2347
|
* -----------------------------------------------------------
|
*/
|
WID_RTS_THRESHOLD = 0x1000,
|
|
/*
|
* Fragmentation Threshold
|
* -----------------------------------------------------------
|
* Configuration : Any value between 256 to 2346
|
* Values to set : Same value. Default is 2346
|
* -----------------------------------------------------------
|
*/
|
WID_FRAG_THRESHOLD = 0x1001,
|
|
WID_SHORT_RETRY_LIMIT = 0x1002,
|
WID_LONG_RETRY_LIMIT = 0x1003,
|
WID_BEACON_INTERVAL = 0x1006,
|
WID_MEMORY_ACCESS_16BIT = 0x1008,
|
WID_RX_SENSE = 0x100B,
|
WID_ACTIVE_SCAN_TIME = 0x100C,
|
WID_PASSIVE_SCAN_TIME = 0x100D,
|
|
WID_SITE_SURVEY_SCAN_TIME = 0x100E,
|
WID_JOIN_START_TIMEOUT = 0x100F,
|
WID_AUTH_TIMEOUT = 0x1010,
|
WID_ASOC_TIMEOUT = 0x1011,
|
WID_11I_PROTOCOL_TIMEOUT = 0x1012,
|
WID_EAPOL_RESPONSE_TIMEOUT = 0x1013,
|
|
/* NMAC Short WID list */
|
WID_11N_SIG_QUAL_VAL = 0x1085,
|
WID_CCA_THRESHOLD = 0x1087,
|
|
/* Custom Short WID list */
|
|
/* EMAC Integer WID list */
|
WID_FAILED_COUNT = 0x2000,
|
WID_RETRY_COUNT = 0x2001,
|
WID_MULTIPLE_RETRY_COUNT = 0x2002,
|
WID_FRAME_DUPLICATE_COUNT = 0x2003,
|
WID_ACK_FAILURE_COUNT = 0x2004,
|
WID_RECEIVED_FRAGMENT_COUNT = 0x2005,
|
WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006,
|
WID_FCS_ERROR_COUNT = 0x2007,
|
WID_SUCCESS_FRAME_COUNT = 0x2008,
|
WID_HUT_TX_COUNT = 0x200A,
|
WID_TX_FRAGMENT_COUNT = 0x200B,
|
WID_TX_MULTICAST_FRAME_COUNT = 0x200C,
|
WID_RTS_SUCCESS_COUNT = 0x200D,
|
WID_RTS_FAILURE_COUNT = 0x200E,
|
WID_WEP_UNDECRYPTABLE_COUNT = 0x200F,
|
WID_REKEY_PERIOD = 0x2010,
|
WID_REKEY_PACKET_COUNT = 0x2011,
|
WID_1X_SERV_ADDR = 0x2012,
|
WID_STACK_IP_ADDR = 0x2013,
|
WID_STACK_NETMASK_ADDR = 0x2014,
|
WID_HW_RX_COUNT = 0x2015,
|
WID_MEMORY_ADDRESS = 0x201E,
|
WID_MEMORY_ACCESS_32BIT = 0x201F,
|
WID_RF_REG_VAL = 0x2021,
|
|
/* NMAC Integer WID list */
|
WID_11N_PHY_ACTIVE_REG_VAL = 0x2080,
|
|
/* Custom Integer WID list */
|
WID_GET_INACTIVE_TIME = 0x2084,
|
WID_SET_OPERATION_MODE = 0X2086,
|
/* EMAC String WID list */
|
WID_SSID = 0x3000,
|
WID_FIRMWARE_VERSION = 0x3001,
|
WID_OPERATIONAL_RATE_SET = 0x3002,
|
WID_BSSID = 0x3003,
|
WID_WEP_KEY_VALUE = 0x3004,
|
WID_11I_PSK = 0x3008,
|
WID_11E_P_ACTION_REQ = 0x3009,
|
WID_1X_KEY = 0x300A,
|
WID_HARDWARE_VERSION = 0x300B,
|
WID_MAC_ADDR = 0x300C,
|
WID_HUT_DEST_ADDR = 0x300D,
|
WID_PHY_VERSION = 0x300F,
|
WID_SUPP_USERNAME = 0x3010,
|
WID_SUPP_PASSWORD = 0x3011,
|
WID_SITE_SURVEY_RESULTS = 0x3012,
|
WID_RX_POWER_LEVEL = 0x3013,
|
WID_DEL_ALL_RX_BA = 0x3014,
|
WID_SET_STA_MAC_INACTIVE_TIME = 0x3017,
|
WID_ADD_WEP_KEY = 0x3019,
|
WID_REMOVE_WEP_KEY = 0x301A,
|
WID_ADD_PTK = 0x301B,
|
WID_ADD_RX_GTK = 0x301C,
|
WID_ADD_TX_GTK = 0x301D,
|
WID_REMOVE_KEY = 0x301E,
|
WID_ASSOC_REQ_INFO = 0x301F,
|
WID_ASSOC_RES_INFO = 0x3020,
|
WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */
|
WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */
|
WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */
|
WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */
|
WID_SET_DRV_HANDLER = 0x3079,
|
|
/* NMAC String WID list */
|
WID_11N_P_ACTION_REQ = 0x3080,
|
WID_HUT_TEST_ID = 0x3081,
|
WID_PMKID_INFO = 0x3082,
|
WID_FIRMWARE_INFO = 0x3083,
|
WID_REGISTER_FRAME = 0x3084,
|
WID_DEL_ALL_STA = 0x3085,
|
WID_REMAIN_ON_CHAN = 0x3996,
|
WID_SSID_PROBE_REQ = 0x3997,
|
WID_JOIN_REQ_EXTENDED = 0x3998,
|
|
WID_IP_ADDRESS = 0x3999,
|
|
/* Custom String WID list */
|
|
/* EMAC Binary WID list */
|
WID_UAPSD_CONFIG = 0x4001,
|
WID_UAPSD_STATUS = 0x4002,
|
WID_WMM_AP_AC_PARAMS = 0x4003,
|
WID_WMM_STA_AC_PARAMS = 0x4004,
|
WID_NETWORK_INFO = 0x4005,
|
WID_STA_JOIN_INFO = 0x4006,
|
WID_CONNECTED_STA_LIST = 0x4007,
|
|
/* NMAC Binary WID list */
|
WID_11N_AUTORATE_TABLE = 0x4080,
|
|
WID_SCAN_CHANNEL_LIST = 0x4084,
|
|
WID_INFO_ELEMENT_PROBE = 0x4085,
|
WID_INFO_ELEMENT_ASSOCIATE = 0x4086,
|
WID_ADD_STA = 0X4087,
|
WID_REMOVE_STA = 0X4088,
|
WID_EDIT_STA = 0X4089,
|
WID_ADD_BEACON = 0x408a,
|
|
WID_SETUP_MULTICAST_FILTER = 0x408b,
|
|
/* Miscellaneous WIDs */
|
WID_ALL = 0x7FFE,
|
WID_MAX = 0xFFFF
|
};
|
|
struct wilc;
|
int wilc_wlan_init(struct net_device *dev);
|
u32 wilc_get_chipid(struct wilc *wilc, bool update);
|
|
#endif
|
