// SPDX-License-Identifier: GPL-2.0+
|
/*
|
* FB driver for the ILI9340 LCD Controller
|
*
|
* Copyright (C) 2013 Noralf Tronnes
|
*/
|
|
#include <linux/module.h>
|
#include <linux/kernel.h>
|
#include <linux/init.h>
|
#include <linux/gpio.h>
|
#include <linux/delay.h>
|
#include <video/mipi_display.h>
|
|
#include "fbtft.h"
|
|
#define DRVNAME "fb_ili9340"
|
#define WIDTH 240
|
#define HEIGHT 320
|
|
/* Init sequence taken from: Arduino Library for the Adafruit 2.2" display */
|
static int init_display(struct fbtft_par *par)
|
{
|
par->fbtftops.reset(par);
|
|
write_reg(par, 0xEF, 0x03, 0x80, 0x02);
|
write_reg(par, 0xCF, 0x00, 0XC1, 0X30);
|
write_reg(par, 0xED, 0x64, 0x03, 0X12, 0X81);
|
write_reg(par, 0xE8, 0x85, 0x00, 0x78);
|
write_reg(par, 0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02);
|
write_reg(par, 0xF7, 0x20);
|
write_reg(par, 0xEA, 0x00, 0x00);
|
|
/* Power Control 1 */
|
write_reg(par, 0xC0, 0x23);
|
|
/* Power Control 2 */
|
write_reg(par, 0xC1, 0x10);
|
|
/* VCOM Control 1 */
|
write_reg(par, 0xC5, 0x3e, 0x28);
|
|
/* VCOM Control 2 */
|
write_reg(par, 0xC7, 0x86);
|
|
/* COLMOD: Pixel Format Set */
|
/* 16 bits/pixel */
|
write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
|
|
/* Frame Rate Control */
|
/* Division ratio = fosc, Frame Rate = 79Hz */
|
write_reg(par, 0xB1, 0x00, 0x18);
|
|
/* Display Function Control */
|
write_reg(par, 0xB6, 0x08, 0x82, 0x27);
|
|
/* Gamma Function Disable */
|
write_reg(par, 0xF2, 0x00);
|
|
/* Gamma curve selection */
|
write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
|
|
/* Positive Gamma Correction */
|
write_reg(par, 0xE0,
|
0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E, 0xF1,
|
0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00);
|
|
/* Negative Gamma Correction */
|
write_reg(par, 0xE1,
|
0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31, 0xC1,
|
0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F);
|
|
write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
|
|
mdelay(120);
|
|
write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
|
|
return 0;
|
}
|
|
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
|
{
|
write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
|
xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
|
|
write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
|
ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
|
|
write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
|
}
|
|
#define ILI9340_MADCTL_MV 0x20
|
#define ILI9340_MADCTL_MX 0x40
|
#define ILI9340_MADCTL_MY 0x80
|
static int set_var(struct fbtft_par *par)
|
{
|
u8 val;
|
|
switch (par->info->var.rotate) {
|
case 270:
|
val = ILI9340_MADCTL_MV;
|
break;
|
case 180:
|
val = ILI9340_MADCTL_MY;
|
break;
|
case 90:
|
val = ILI9340_MADCTL_MV | ILI9340_MADCTL_MY | ILI9340_MADCTL_MX;
|
break;
|
default:
|
val = ILI9340_MADCTL_MX;
|
break;
|
}
|
/* Memory Access Control */
|
write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, val | (par->bgr << 3));
|
|
return 0;
|
}
|
|
static struct fbtft_display display = {
|
.regwidth = 8,
|
.width = WIDTH,
|
.height = HEIGHT,
|
.fbtftops = {
|
.init_display = init_display,
|
.set_addr_win = set_addr_win,
|
.set_var = set_var,
|
},
|
};
|
|
FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9340", &display);
|
|
MODULE_ALIAS("spi:" DRVNAME);
|
MODULE_ALIAS("platform:" DRVNAME);
|
MODULE_ALIAS("spi:ili9340");
|
MODULE_ALIAS("platform:ili9340");
|
|
MODULE_DESCRIPTION("FB driver for the ILI9340 LCD Controller");
|
MODULE_AUTHOR("Noralf Tronnes");
|
MODULE_LICENSE("GPL");
|
