// SPDX-License-Identifier: GPL-2.0+
|
/**
|
*
|
* Driver for ROCKCHIP RK630 Ethernet PHYs
|
*
|
* Copyright (c) 2020, Rockchip Electronics Co., Ltd
|
*
|
* David Wu <david.wu@rock-chips.com>
|
*
|
*/
|
|
#include <linux/ethtool.h>
|
#include <linux/kernel.h>
|
#include <linux/interrupt.h>
|
#include <linux/module.h>
|
#include <linux/mfd/core.h>
|
#include <linux/mii.h>
|
#include <linux/netdevice.h>
|
#include <linux/of_irq.h>
|
#include <linux/phy.h>
|
#include <linux/platform_device.h>
|
#include <linux/wakelock.h>
|
|
#define RK630_PHY_ID 0x00441400
|
|
/* PAGE 0 */
|
#define REG_INTERRUPT_STATUS 0X10
|
#define REG_INTERRUPT_MASK 0X11
|
#define REG_GLOBAL_CONFIGURATION 0X13
|
#define REG_MAC_ADDRESS0 0x16
|
#define REG_MAC_ADDRESS1 0x17
|
#define REG_MAC_ADDRESS2 0x18
|
|
#define REG_PAGE_SEL 0x1F
|
|
/* PAGE 1 */
|
#define REG_PAGE1_APS_CTRL 0x12
|
#define REG_PAGE1_UAPS_CONFIGURE 0X13
|
#define REG_PAGE1_EEE_CONFIGURE 0x17
|
|
/* PAGE 2 */
|
#define REG_PAGE2_AFE_CTRL 0x18
|
|
/* PAGE 6 */
|
#define REG_PAGE6_ADC_ANONTROL 0x10
|
#define REG_PAGE6_GAIN_ANONTROL 0x12
|
#define REG_PAGE6_AFE_RX_CTRL 0x13
|
#define REG_PAGE6_AFE_TX_CTRL 0x14
|
#define REG_PAGE6_AFE_DRIVER2 0x15
|
#define REG_PAGE6_CP_CURRENT 0x17
|
#define REG_PAGE6_ADC_OP_BIAS 0x18
|
#define REG_PAGE6_RX_DECTOR 0x19
|
#define REG_PAGE6_AFE_PDCW 0x1c
|
|
/* PAGE 8 */
|
#define REG_PAGE8_AFE_CTRL 0x18
|
#define REG_PAGE8_AUTO_CAL 0x1d
|
|
/*
|
* Fixed address:
|
* Addr: 1 --- RK630@S40
|
* 2 --- RV1106@T22
|
*/
|
#define PHY_ADDR_S40 1
|
#define PHY_ADDR_T22 2
|
|
struct rk630_phy_priv {
|
struct phy_device *phydev;
|
bool ieee;
|
int wol_irq;
|
struct wake_lock wol_wake_lock;
|
};
|
|
static void rk630_phy_wol_enable(struct phy_device *phydev)
|
{
|
struct net_device *ndev = phydev->attached_dev;
|
u32 value;
|
|
/* Switch to page 0 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0000);
|
phy_write(phydev, REG_MAC_ADDRESS0, ((u16)ndev->dev_addr[0] << 8) + ndev->dev_addr[1]);
|
phy_write(phydev, REG_MAC_ADDRESS1, ((u16)ndev->dev_addr[2] << 8) + ndev->dev_addr[3]);
|
phy_write(phydev, REG_MAC_ADDRESS2, ((u16)ndev->dev_addr[4] << 8) + ndev->dev_addr[5]);
|
|
value = phy_read(phydev, REG_GLOBAL_CONFIGURATION);
|
value |= BIT(8);
|
value &= ~BIT(7);
|
value |= BIT(10);
|
phy_write(phydev, REG_GLOBAL_CONFIGURATION, value);
|
|
value = phy_read(phydev, REG_INTERRUPT_MASK);
|
value |= BIT(14);
|
phy_write(phydev, REG_INTERRUPT_MASK, value);
|
}
|
|
static void rk630_phy_wol_disable(struct phy_device *phydev)
|
{
|
u32 value;
|
|
/* Switch to page 0 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0000);
|
value = phy_read(phydev, REG_GLOBAL_CONFIGURATION);
|
value &= ~BIT(10);
|
phy_write(phydev, REG_GLOBAL_CONFIGURATION, value);
|
}
|
|
static void rk630_phy_ieee_set(struct phy_device *phydev, bool enable)
|
{
|
u32 value;
|
|
/* Switch to page 1 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0100);
|
value = phy_read(phydev, REG_PAGE1_EEE_CONFIGURE);
|
if (enable)
|
value |= BIT(3);
|
else
|
value &= ~BIT(3);
|
phy_write(phydev, REG_PAGE1_EEE_CONFIGURE, value);
|
/* Switch to page 0 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0000);
|
}
|
|
static void rk630_phy_set_uaps(struct phy_device *phydev)
|
{
|
u32 value;
|
|
/* Switch to page 1 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0100);
|
value = phy_read(phydev, REG_PAGE1_UAPS_CONFIGURE);
|
value |= BIT(15);
|
phy_write(phydev, REG_PAGE1_UAPS_CONFIGURE, value);
|
/* Switch to page 0 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0000);
|
}
|
|
static void rk630_phy_s40_config_init(struct phy_device *phydev)
|
{
|
phy_write(phydev, 0, phy_read(phydev, 0) & ~BIT(13));
|
|
/* Switch to page 1 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0100);
|
/* Disable APS */
|
phy_write(phydev, REG_PAGE1_APS_CTRL, 0x4824);
|
/* Switch to page 2 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0200);
|
/* PHYAFE TRX optimization */
|
phy_write(phydev, REG_PAGE2_AFE_CTRL, 0x0000);
|
/* Switch to page 6 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0600);
|
/* PHYAFE TX optimization */
|
phy_write(phydev, REG_PAGE6_AFE_TX_CTRL, 0x708f);
|
/* PHYAFE RX optimization */
|
phy_write(phydev, REG_PAGE6_AFE_RX_CTRL, 0xf000);
|
phy_write(phydev, REG_PAGE6_AFE_DRIVER2, 0x1530);
|
|
/* Switch to page 8 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0800);
|
/* PHYAFE TRX optimization */
|
phy_write(phydev, REG_PAGE8_AFE_CTRL, 0x00bc);
|
|
/* Switch to page 0 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0000);
|
}
|
|
static void rk630_phy_t22_config_init(struct phy_device *phydev)
|
{
|
/* Switch to page 1 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0100);
|
/* Disable APS */
|
phy_write(phydev, REG_PAGE1_APS_CTRL, 0x4824);
|
/* Switch to page 2 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0200);
|
/* PHYAFE TRX optimization */
|
phy_write(phydev, REG_PAGE2_AFE_CTRL, 0x0000);
|
/* Switch to page 6 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0600);
|
/* PHYAFE ADC optimization */
|
phy_write(phydev, REG_PAGE6_ADC_ANONTROL, 0x5540);
|
/* PHYAFE Gain optimization */
|
phy_write(phydev, REG_PAGE6_GAIN_ANONTROL, 0x0400);
|
/* PHYAFE EQ optimization */
|
phy_write(phydev, REG_PAGE6_AFE_TX_CTRL, 0x1088);
|
/* PHYAFE TX optimization */
|
phy_write(phydev, REG_PAGE6_AFE_DRIVER2, 0x3030);
|
/* PHYAFE CP current optimization */
|
phy_write(phydev, REG_PAGE6_CP_CURRENT, 0x0575);
|
/* ADC OP BIAS optimization */
|
phy_write(phydev, REG_PAGE6_ADC_OP_BIAS, 0x0000);
|
/* Rx signal detctor level optimization */
|
phy_write(phydev, REG_PAGE6_RX_DECTOR, 0x0408);
|
/* PHYAFE PDCW optimization */
|
phy_write(phydev, REG_PAGE6_AFE_PDCW, 0x8880);
|
|
/* Switch to page 8 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0800);
|
/* Disable auto-cal */
|
phy_write(phydev, REG_PAGE8_AUTO_CAL, 0x0844);
|
|
/* Switch to page 0 */
|
phy_write(phydev, REG_PAGE_SEL, 0x0000);
|
}
|
|
static int rk630_phy_config_init(struct phy_device *phydev)
|
{
|
switch (phydev->mdio.addr) {
|
case PHY_ADDR_S40:
|
rk630_phy_s40_config_init(phydev);
|
break;
|
case PHY_ADDR_T22:
|
rk630_phy_t22_config_init(phydev);
|
break;
|
default:
|
phydev_err(phydev, "Unsupported address for current phy: %d\n",
|
phydev->mdio.addr);
|
return -EINVAL;
|
}
|
|
rk630_phy_ieee_set(phydev, true);
|
/*
|
* Ultra Auto-Power Saving Mode (UAPS) is designed to
|
* save power when cable is not plugged into PHY.
|
*/
|
rk630_phy_set_uaps(phydev);
|
|
return 0;
|
}
|
|
static irqreturn_t rk630_wol_irq_thread(int irq, void *dev_id)
|
{
|
struct rk630_phy_priv *priv = (struct rk630_phy_priv *)dev_id;
|
|
phy_write(priv->phydev, REG_INTERRUPT_STATUS, BIT(14));
|
wake_lock_timeout(&priv->wol_wake_lock, msecs_to_jiffies(8000));
|
return IRQ_HANDLED;
|
}
|
|
static int rk630_phy_probe(struct phy_device *phydev)
|
{
|
struct rk630_phy_priv *priv;
|
int ret;
|
|
priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
|
if (!priv)
|
return -ENOMEM;
|
|
phydev->priv = priv;
|
|
priv->wol_irq = of_irq_get_byname(phydev->mdio.dev.of_node, "wol_irq");
|
if (priv->wol_irq == -EPROBE_DEFER)
|
return priv->wol_irq;
|
|
if (priv->wol_irq > 0) {
|
wake_lock_init(&priv->wol_wake_lock,
|
WAKE_LOCK_SUSPEND, "wol_wake_lock");
|
ret = devm_request_threaded_irq(&phydev->mdio.dev, priv->wol_irq,
|
NULL, rk630_wol_irq_thread,
|
IRQF_TRIGGER_FALLING | IRQF_SHARED | IRQF_ONESHOT,
|
"wol_irq", priv);
|
if (ret) {
|
wake_lock_destroy(&priv->wol_wake_lock);
|
phydev_err(phydev, "request wol_irq failed: %d\n", ret);
|
return ret;
|
}
|
disable_irq(priv->wol_irq);
|
enable_irq_wake(priv->wol_irq);
|
}
|
|
priv->phydev = phydev;
|
|
return 0;
|
}
|
|
static void rk630_phy_remove(struct phy_device *phydev)
|
{
|
struct rk630_phy_priv *priv = phydev->priv;
|
|
if (priv->wol_irq > 0)
|
wake_lock_destroy(&priv->wol_wake_lock);
|
}
|
|
static int rk630_phy_suspend(struct phy_device *phydev)
|
{
|
struct rk630_phy_priv *priv = phydev->priv;
|
|
if (priv->wol_irq > 0) {
|
rk630_phy_wol_enable(phydev);
|
phy_write(phydev, REG_INTERRUPT_MASK, BIT(14));
|
enable_irq(priv->wol_irq);
|
}
|
return genphy_suspend(phydev);
|
}
|
|
static int rk630_phy_resume(struct phy_device *phydev)
|
{
|
struct rk630_phy_priv *priv = phydev->priv;
|
|
if (priv->wol_irq > 0) {
|
rk630_phy_wol_disable(phydev);
|
phy_write(phydev, REG_INTERRUPT_MASK, 0);
|
disable_irq(priv->wol_irq);
|
}
|
|
return genphy_resume(phydev);
|
}
|
|
static struct phy_driver rk630_phy_driver[] = {
|
{
|
.phy_id = RK630_PHY_ID,
|
.phy_id_mask = 0xffffffff,
|
.name = "RK630 PHY",
|
.features = PHY_BASIC_FEATURES,
|
.flags = 0,
|
.probe = rk630_phy_probe,
|
.remove = rk630_phy_remove,
|
.soft_reset = genphy_soft_reset,
|
.config_init = rk630_phy_config_init,
|
.config_aneg = genphy_config_aneg,
|
.read_status = genphy_read_status,
|
.suspend = rk630_phy_suspend,
|
.resume = rk630_phy_resume,
|
},
|
};
|
|
static struct mdio_device_id __maybe_unused rk630_phy_tbl[] = {
|
{ RK630_PHY_ID, 0xffffffff },
|
{ }
|
};
|
|
MODULE_DEVICE_TABLE(mdio, rockchip_phy_tbl);
|
|
module_phy_driver(rk630_phy_driver);
|
|
MODULE_AUTHOR("David Wu <david.wu@rock-chips.com>");
|
MODULE_DESCRIPTION("Rockchip RK630 Ethernet PHY driver");
|
MODULE_LICENSE("GPL v2");
|
