* Power Management Controller
|
|
Properties:
|
- compatible: "fsl,<chip>-pmc".
|
|
"fsl,mpc8349-pmc" should be listed for any chip whose PMC is
|
compatible. "fsl,mpc8313-pmc" should also be listed for any chip
|
whose PMC is compatible, and implies deep-sleep capability.
|
|
"fsl,mpc8548-pmc" should be listed for any chip whose PMC is
|
compatible. "fsl,mpc8536-pmc" should also be listed for any chip
|
whose PMC is compatible, and implies deep-sleep capability.
|
|
"fsl,mpc8641d-pmc" should be listed for any chip whose PMC is
|
compatible; all statements below that apply to "fsl,mpc8548-pmc" also
|
apply to "fsl,mpc8641d-pmc".
|
|
Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
|
bit assignments are indicated via the sleep specifier in each device's
|
sleep property.
|
|
- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
|
is the PMC block, and the second resource is the Clock Configuration
|
block.
|
|
For devices compatible with "fsl,mpc8548-pmc", the first resource
|
is a 32-byte block beginning with DEVDISR.
|
|
- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first
|
resource is the PMC block interrupt.
|
|
- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices,
|
this is a phandle to an "fsl,gtm" node on which timer 4 can be used as
|
a wakeup source from deep sleep.
|
|
Sleep specifiers:
|
|
fsl,mpc8349-pmc: Sleep specifiers consist of one cell. For each bit
|
that is set in the cell, the corresponding bit in SCCR will be saved
|
and cleared on suspend, and restored on resume. This sleep controller
|
supports disabling and resuming devices at any time.
|
|
fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of
|
which will be ORed into PMCDR upon suspend, and cleared from PMCDR
|
upon resume. The first two cells are as described for fsl,mpc8578-pmc.
|
This sleep controller only supports disabling devices during system
|
sleep, or permanently.
|
|
fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the
|
first of which will be ORed into DEVDISR (and the second into
|
DEVDISR2, if present -- this cell should be zero or absent if the
|
hardware does not have DEVDISR2) upon a request for permanent device
|
disabling. This sleep controller does not support configuring devices
|
to disable during system sleep (unless supported by another compatible
|
match), or dynamically.
|
|
Example:
|
|
power@b00 {
|
compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
|
reg = <0xb00 0x100 0xa00 0x100>;
|
interrupts = <80 8>;
|
};
|
