* Sony IMX378 MIPI sensor
|
|
Required Properties:
|
- compatible: should be "sony,imx378"
|
- clocks: reference to the 24M xvclk input clock.
|
- clock-names: should be "xvclk".
|
- dovdd-supply: Digital I/O voltage supply, 1.8 volts
|
- avdd-supply: Analog voltage supply, 2.8 volts
|
- dvdd-supply: Digital core voltage supply, 1.2 volts
|
- reset-gpios: High active reset gpio
|
|
Attention:
|
IMX378 device address 0x1a(7bit);
|
|
The device node must contain one 'port' child node for its digital output
|
video port, in accordance with the video interface bindings defined in
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
Example:
|
|
&i2c1 {
|
status = "okay";
|
imx378: imx378@1a {
|
compatible = "sony,imx378";
|
reg = <0x1a>;
|
clocks = <&cru CLK_MIPICSI_OUT>;
|
clock-names = "xvclk";
|
power-domains = <&power RV1126_PD_VI>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&mipicsi_clk0>;
|
avdd-supply = <&vcc_avdd>;
|
dovdd-supply = <&vcc_dovdd>;
|
dvdd-supply = <&vcc_dvdd>;
|
pwdn-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
|
reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
rockchip,camera-module-index = <1>;
|
rockchip,camera-module-facing = "front";
|
rockchip,camera-module-name = "A12N01B";
|
rockchip,camera-module-lens-name = "48IRC-12M-F18";
|
/* NO_HDR:0 HDR_X2:5 HDR_X3:6 */
|
rockchip,camera-hdr-mode = <0>;
|
port {
|
sc4238_out: endpoint {
|
remote-endpoint = <&mipi_in_ucam1>;
|
data-lanes = <1 2 3 4>;
|
};
|
};
|
};
|
};
|
