* Sony IMX323 DVP sensor
|
|
Required Properties:
|
- compatible: should be "sony,imx323"
|
- clocks: reference to the 37.125M xvclk input clock.
|
- clock-names: should be "xvclk".
|
- dovdd-supply: Digital I/O voltage supply, 1.8 volts
|
- avdd-supply: Analog voltage supply, 2.8 volts
|
- dvdd-supply: Digital core voltage supply, 1.2 volts
|
- reset-gpios: Low active reset gpio
|
|
The device node must contain one 'port' child node for its digital output
|
video port, in accordance with the video interface bindings defined in
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
Example:
|
&i2c3: imx323@1a {
|
compatible = "sony,imx323";
|
reg = <0x1a>;
|
clocks = <&cru SCLK_CIF_OUT>;
|
clock-names = "xvclk";
|
avdd-supply = <&vcc2v8_dvp>;
|
dovdd-supply = <&vcc1v8_dvp>;
|
dvdd-supply = <&vdd1v5_dvp>;
|
pwdn-gpios = <&gpio2 RK_PC4 GPIO_ACTIVE_HIGH>;
|
reset-gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&dvp_d0d1_m0 &dvp_d2d9_m0
|
&dvp_d10d11_m0 &cif_clkout_m0>;
|
port {
|
imx323_out: endpoint {
|
remote-endpoint = <&isp0_dvp_in>;
|
};
|
};
|
};
|
