SKY81452-backlight bindings
|
|
Required properties:
|
- compatible : Must be "skyworks,sky81452-backlight"
|
|
Optional properties:
|
- name : Name of backlight device. Default is 'lcd-backlight'.
|
- gpios : GPIO to use to EN pin.
|
See Documentation/devicetree/bindings/gpio/gpio.txt
|
- led-sources : List of enabled channels from 0 to 5.
|
See Documentation/devicetree/bindings/leds/common.txt
|
- skyworks,ignore-pwm : Ignore both PWM input
|
- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming.
|
- skyworks,phase-shift : Enable phase shift mode
|
- skyworks,short-detection-threshold-volt
|
: It should be one of 4, 5, 6 and 7V.
|
- skyworks,current-limit-mA
|
: It should be 2300mA or 2750mA.
|
|
Example:
|
|
backlight {
|
compatible = "skyworks,sky81452-backlight";
|
name = "pwm-backlight";
|
led-sources = <0 1 2 5>;
|
skyworks,ignore-pwm;
|
skyworks,phase-shift;
|
skyworks,current-limit-mA = <2300>;
|
};
|
