1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
| Binding for Qualcomm PM8941 WLED driver
|
| Required properties:
| - compatible: should be "qcom,pm8941-wled"
| - reg: slave address
|
| Optional properties:
| - default-brightness: brightness value on boot, value from: 0-4095
| default: 2048
| - label: The name of the backlight device
| - qcom,cs-out: bool; enable current sink output
| - qcom,cabc: bool; enable content adaptive backlight control
| - qcom,ext-gen: bool; use externally generated modulator signal to dim
| - qcom,current-limit: mA; per-string current limit; value from 0 to 25
| default: 20mA
| - qcom,current-boost-limit: mA; boost current limit; one of:
| 105, 385, 525, 805, 980, 1260, 1400, 1680
| default: 805mA
| - qcom,switching-freq: kHz; switching frequency; one of:
| 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371,
| 1600, 1920, 2400, 3200, 4800, 9600,
| default: 1600kHz
| - qcom,ovp: V; Over-voltage protection limit; one of:
| 27, 29, 32, 35
| default: 29V
| - qcom,num-strings: #; number of led strings attached; value from 1 to 3
| default: 2
|
| Example:
|
| pm8941-wled@d800 {
| compatible = "qcom,pm8941-wled";
| reg = <0xd800>;
| label = "backlight";
|
| qcom,cs-out;
| qcom,current-limit = <20>;
| qcom,current-boost-limit = <805>;
| qcom,switching-freq = <1600>;
| qcom,ovp = <29>;
| qcom,num-strings = <2>;
| };
|
|
